Kanguru KCLONE-5HD-SATA User Manual

Kanguru KCLONE-5HD-SATA User Manual Manual pdf 14 page image

143.3 ResizeRESIZE mode is used to copy between Source and Target drives of different capacities. TheResize mode allows for copying from a smaller capacity Source to larger capacity Targetdrives. Resize copy supports the following file systems: FAT, FAT32, NTFS. If the Source isnot formatted as a supported file system then the duplicator will automatically switch to FULLmode. When duplicating in Resize mode, Target drives should all be the same capacity.Note: When using Resize Copy to duplicate a drive with multiple partitions, each partition willbe expanded equally in porportion to the remaining unallocated space. If you want to resizeonly the last partition on the drtive, you will need to enable Advanced Resize (see section 8.6Advanced Resize on page 32).3.4 FullFULL mode copies drives sector by sector from the Source to the Target(s), and supports allmajor OS formats (DOS/Windows/Mac/Linux). This mode is the slowest copy mode, but thesafest.3.5 RatioThe Ratio Copy operation allows you to copy a defined percentage of the Master hard drive. TheMaster hard drive is divided in 1000 units. You must define the beginning and ending percentagesbefore using this operation. To define the percentages you have to enter the Advanced Setup menu,and configure the SET RAT. HEAD and SET RAT. TAIL options. For more information on definingthe beginning and ending sectors see section 8.16 Set Ratio Head on page 35 and section 8.17 SetRatio Tail on page 35.Duplication Modes