185.2 Duplicating From a Storage CenterThe KanguruClone hard drive duplicator allows you to turn a standard hard drive into a StorageCenter. You can load images of your Master HDDs directly to the Storage Center providing you witha convenient way to store common Source files.5.2.1 Formatting a hard drive as a Storage CenterFirst you need to format a hard drive as a Storage Center:1. From the Main menu, hold the ‘SET’ button to enter the SETUP menu.2. From the SETUP menu, tap the ‘SET’ button to navigate to the ADVANCED SETUP optionand then tap the ‘RUN’ button to enter the ADVANCED SETUP menu.3. From the ADVANCED SETUP menu, tap the ‘SET’ button to navigate to the FORMATSOURCE operation.4. Connect the hard drive that you want to use as a Storage Center to the Source port on theduplicator.5. Tap the ‘RUN’ button to execute the FORMAT SOURCE option.6. A confirmation screen appears. Tap the ‘RUN’ button to proceed with formatting the hard driveas a Storage Center or tap the ‘SET’ button to cancel.Caution! Formatting will erase any data currently stored on the hard drive.Once the format has completed, tap any button to return to the ADVANCED SETUP menu. Your harddrive has now been formatted as a Storage Center. You can now load images of Master HDD’s to theStorage Center for convenient duplication.Note: A hard drive formatted as a Storage Center will not be recognized when connected directly toa computer. The Storage Center uses a proprietary format not recognized by most operating systems.5.2.2 Loading a Master HDD image to the Storage CenterOnce you have formatted a hard drive to act as a Storage Center, you can load images of your MasterHDD’s to the Storage Center. To load a Master HDD image to the Storage Center:1. Make sure your Storage Center is connected to the Source port and that the Master HDD isconnected to any other target port.2. From the Main menu, tap the ‘SET’ button to navigate to LOAD. You will see the followingscreen:(Continued on next page)Duplicating From a Storage Center