Kathrein UFD 420 Operating Manual

Also see for UFD 420: Operating manual Mode d'emploi

Kathrein UFD 420 Operating Manual Manual pdf 23 page image

Programming radio programmes23Programmieren von Radio-ProgrammenProgramme providers also broadcast radio programmes via the satellites. The“Radio“ menu allows you to store new programmes.The settings for radio programmes in “Radio“ mode are carried out in the sameway as for the “TV“ mode.Tuning in radio programmes• Switch from “TV mode“ into “Radio mode“ using the key.• First select the programme slot that is to be programmed anew.• Call up the radio menu by pressing the + keys in succession.• Select the desired menu line using keys the keys.• For direct numeric input use the keys ...or• Alter the values step-by-step with the keys.• Press the key twice in order to save your settings.• Exit from the menu with the key.Note Pay attention to the note on memory organisation of TV and radio programmes onpage 18.The "Radio" menuThe following parameters can be selected in the radio menu:Setting option:Programme slot: from 1 to 250Programme name: 5-character station identifierSat-transm. freq.: from 10700 to 12747 MHzPolarisation: Hor Low / Vert Low /Hor High / Vert HighOrbit Position: 1 to 4Oscillator: LO 1 to LO 4Modus: Mono wide, Mono narrow, StereoSound carrier freq.: from 5.00 to 8.98 MHzAudio de-emphasis: 50 μs / J 17 / dnr,75 μsVolume offset: from 0 to –3The bottom line shows the keys you can use to make the settings.Radio programmes are transmitted on sound subcarriers only. The setting to bemade is therefore either “Stereo“ or “Mono narrow“. Here the audio de-emphasis isselected automatically as “DNR“ and 75 μs.Settings are carried out in the same way as for the TV programmes.The initial setting for the volume can be saved separately for every programme slotjust as in the TV mode.Setting option with keys from 0 to –3.Note You can terminate any setup procedure immediately (also without storing) by re-turning to normal operation via the key