Features31The UFD 420 receiver is equipped with the following features:• 2 tuners for simultaneous operation of the TV set and video recorder with differ-ent programmes• 250 programme channel memory• Satellite input frequency range from 920 MHz to 2150 MHz• Freely selectable oscillator frequencies - therefore suitable for all feed systems• Radio button• 4 event, 1-year programmable timer, with daily andweekly repeated switch-on• Mains switch with mains isolation• Power failure protection for date and time by lithium battery• Stereo / Dual tone switchover• On-screen display (OSD) 3 languages (German, English and French)• 22 kHz control signal, programmable• DiSEqC 1.1 and tone-burst control signal• LNB supply voltage can be turned off• Connecting socket for data copying function(read-in and read-out of programme data with the “Copy Programmer“)• Connector available for URS 200 external infrared sensor• Sort- (insert), swap- and copy function for programme slot• Audio frequency range 5.0 MHz to 8.8 MHz• Sound muting• Volume control and also controls for balance, tone and stereo width• Dynamic noise reduction (DNR) – Wegener Panda• 3 Scart sockets for TV-, VCR- and decoder connection• PLL modulator• Additional audio outputs via Cinch sockets• Standby power consumption ≤ 2 watts• Last-status memory