Kathrein UFD 420 Operating Manual

Also see for UFD 420: Operating manual Mode d'emploi

Kathrein UFD 420 Operating Manual Manual pdf 4 page image

Controls, displays and connections4Front panel controls and displays1Mains switch (with mains isolation)2LED display for TV (four character 7-segment display)To display the selected programme slot fromtuner A. Tuner A is assigned to the TV Scart socket.This display is also used to show the setup parameters inthe setup mode.3LED display for VCR (four character 7-segment display)To display the selected programme slot fromtuner B. Tuner B is assigned to the VCR Scart socket.4Buttons for programme selectionStep-by-step programme selection (upwards and down-wards).Switchover from TV to radio mode, and switchover fromtuner A to B by pressing both buttons simultaneously.Rear panel controls and displays1Mains input socket for 230 V/50 Hz.2DATA socketa) Connection facility for the URS 200 external infraredsensorb) Connection for the UFP 10 Copy-Programmer forread-in and read-out of the programme data.(function b is especially for service, for copying theprogramme data).3VHF/UHF antenna input (signal is looped through).4VHF/UHF antenna output(TV signal modulator-output, Ch. 38 is preset).5 Satellite IF signal input A andoutput of LNB supply voltage.6Audio output, left and right channel (Cinch sockets).7 Scart socket, TV connection8 Scart socket, VCR connection9 Scart socket, decoder connection10Satellite IF signal input B andoutput of LNB supply voltage.Remote control handset keysFunction 1:To change over the selecting of programmes fromtuner A to tuner B and vice-versa.Function 2:To blank out the video signal (in setup mode) Thisfunction is to be used if the picture no longer syn-chronises on adjustment and the picture scrolls.Starts a timerLast function. Allows you to switch back to the last pro-gramme that was selectedFunction 1:Last function. Allows you to switch back to the lastprogramme that was selectedFunction 2:Displays the info menu(active only if after pressing the keythe programme list is displayed.)Function 1:On/Off (Standby),Attention: No mains isolation results!Function 2:Return from setup mode into normal operationFunction 1:Calls up the TV programme list (or radio programmelist in radio mode).Function 2:Calls up menu for "Programme slot sorting (insertion),swapping and copying“(with press in succession)Set timer, date and timeFunction 1:Selection of TV/SAT modeFunction 2:Call up the menu for video settings(with press in succession)Function 1:Volume controlFunction 2:To alter settings data in setup modeFunction 1:Step through the programmes either up or downFunction 2:Selection of individual menu entries in setup modeFunction 1:Stores the chosen settingsFunction 2:Primary key for calling the separate setup menus(e.g. video settings)Function 1:Switchover to radio modeFunction 2:Calls up the menu for radio settings(with press in successionFunction 1:Mutes the soundFunction 2:Calls up the menu for audio settings(with press in succession) toStereo/Mono- (2 channel) changeoverNumeric keys 0 - 9 for programme selection and fre-quency entries