Kathrein UFS 910 Operating Manual

Also see for UFS 910: Function guide

Contents

Kathrein UFS 910 Operating Manual Manual pdf 44 page image

44RECORDING (TIMER)The (red dot) button allows you to set up a programme at any time for recording on an external recorder.The programme to be recorded can be selected in any of the EPG views, provided the (red dot) buttonappears at the bottom of the screen display.Programme present in the EPG:Select the desired programme and press the (red dot) button. The following display appears(example):Programme not present in the EPG:Select any programme on the channel on which the desired programme is to be transmitted at a later timeand press the (red dot) button (starting and finishing times together with the recording date must be inputmanually). The following display appears (example):Use the buttons to select the desired recording mode. The recording mode options available are:- Once: The recording will be performed once- Daily: The recording will be performed daily at a time specified by you- Weekly: The recording will be performed once a week on the same day and at the same time- User-defi ned: The recording will be performed on days specified by you at times specified by you- Series recording: The selected programme will be set up by the EPG for recording every time it istransmitted (may even be on different channels). This function does however require a daily update ofthe EPG data (the data are updated automatically when switching off into stand-by mode).Use the cursor buttons () to select the further items and use the keypad to completethe settings. When all settings have been made, press the button to save the recording settings.You can view the scheduled recordings in the recording schedule view of the EPG (see item “Recordingschedule”).EPG - ELECTRONIC PROGRAMME GUIDERemember to programyour external recorderin accordance with thetimer list registered inthe receiver.For programming a recording forstorage on an external storagemedium, refer to the note onpage 3 “Recording function (fromsoftware version 1.04)”