Kathrein UFS 910 Operating Manual

Also see for UFS 910: Function guide

Contents

Kathrein UFS 910 Operating Manual Manual pdf 55 page image

55BLOCK CHANNELSUse the buttons to select the channel to be blocked from the current channel list. Press the buttonto call up the edit menu and use the buttons to select the “Lock” function. Confirm the command bypressing the button. you are now prompted to enter the PIN code (factory default setting: 0000).The channel you previously selected is now shown with a padlock to its right. In future this channel can beviewed only by inputting the four-digit PIN code.This function can be restored again using the edit menu (select: “Remove block”).COPY CHANNELS TO THE FAVOURITES LISTUse the buttons to select the channel to be copied from the current channel list. Press the buttonto call up the edit menu and use the buttons to select the “To Favorite” function. Use the buttons to select the favourites list into which the channel is to be copied. The channel remains in the satellitechannels list. Confirm the command by pressing the button.The channel you previously selected is now shown with an “F” and a yellow field in the channels list. The “F”shows that it is a favourite channel; the black dot in the yellow field shows in which of the eight favouriteslists the channel can be found.See the item “Editing favourites lists” for information on how to delete a channel from a favourites list.START BLOCK HIGHLIGHTING (HIGHLIGHTING SEVERAL CHANNELS)Use the buttons to select the channel from which you want to highlight further channels. You can onlyselect channels that are listed in succession in your selected channel list. Press the button to call up theedit menu and use the buttons to select the “Start Blockselection” function. Use the buttonsto highlight the desired channels, starting from the previously highlighted channel and working upwards ordownwards. The highlighted channels will be highlighted in yellow and marked with a tick at the left side.When you have highlighted the channels that you wish to select, press the button to call up the edit menuonce again and use the buttons to select the desired function (“Move”, “Delete”, “Skip”, “Lock” or “ToFavorite”).The selected function can now be used in the same way as described for the respective items in this sectionfor a single channel.EDIT CHANNEL LIST