| 
iPod/iPhoneiPod/iPhone2 Select a category (1), then select adesired item (2).Select an item in each layer until you reach andselect the desired file.• Available categories differ depending on the typeof iPod/iPhone.Settings for iPod/iPhone playback1 Display the screen.On the source control screen, touch as follows:2 Make the settings.• ON (Initial): Shows the artworks of the playingfiles.• OFF: Hides the artworks of the playing files.Listening to the radioPlayback information on the source controlscreen1 Selects the band (AM/FM1/FM2/FM3)2 Text information• Touching [<] scrolls the text if not all of the textis shown.• Touching [Radio Text] switches the informationbetween Radio Text, Radio Text Plus and PTYcode.3 Current station frequency4 Displays the preset stations window (Page 19)5 [P1] – [P5]• (Touch) Selects a preset station.• (Hold) Presets the current station.6 Displays/hides other available operation keys*7 NEWS indicator8 AF indicator9 TI indicatorp Operation keys*RadioRadioq ST/MONO indicatorThe ST indicator lights up when receiving an FMstereo broadcast with sufficient signal strength.w Seek mode indicatore LO.S indicatorr RDS indicatort EON indicatorThe EON indicator lights up when a Radio DataSystem station is sending EON signals.* See the following “Operation keys on source control screen”.Operation keys on source control screen• The appearance of the operation keys may differ,however the similar operation keys have the sameoperations.• See also “Common operation keys on source controlscreen” on page 8.Touching the operation keys performs the followingactions:6[AME ]*1 (Hold) Presets stations automatically.[MONO]*1 Activates monaural mode for better FMreception (stereo effect will be lost).• The MONO indicator lights up whilemonaural mode is activated.• To deactivate, touch [MONO] again.17ENGLISH |
