Kenwood DDX4018DAB Instruction Manual

Digital Radio (DAB)Digital Radio (DAB)[TI] (For RDS features)Activates TI standby reception mode.• When TI is activated, the unit is readyto switch to traffic information ifavailable. The TI indicator lights up inwhite.• If the TI indicator lights up in orange,tune into another service providingRadio Data System signals.• The volume adjustment for TrafficInformation is automaticallymemorized. The next time the unitswitches to Traffic Information, thevolume is set to the memorized level.• The TI Standby Reception can also beactivated or deactivated from “Radio”source control screen. (Page 18)• To deactivate, touch [TI] again.[MODE] Changes the settings for DAB receptionon the screen.9[ ] Displays the screen.[S]/[T] Searches for a service.• The search method differs accordingto the selected seek mode. (Page 20)[DLS] Displays Dynamic Label Segment Screen(text messages the service sends).Selecting a service on the listYou can obtain information on service or select aservice to listen to.1 Display the screen.On the source control screen, touch as follows:2 Select a service from the list.• Touch [A–Z] to display the screen. Then, select the initial to start searching.To search with non-alphabetical characters, touch[#].• Touch and hold [ ] to update the service list.Presetting services in the memoryYou can preset five services for each band.1 Tune in to a service you want to preset.2 Select a preset number to store into.(Hold)The service selected in step 1 is stored into thepreset number [P1] to [P5] you have selected.21ENGLISH