Kenwood DDX4018DAB Instruction Manual

Rear view cameraInstall the rear view camera (separately purchased) inthe appropriate position according to the instructionssupplied with the rear view camera.Connecting a rear view cameraSee page 46 for more information.• To use the rear view camera, a reverse lead (REVERSE)connection is required. (Page 45)Using the rear view camera• For rear camera settings, see onpage 37.To display the rear view camera screenThe rear view screen is displayed by shifting the gearto the reverse (R) position when Interruption> is set to [ON]. (Page 37)• A caution message appears on the screen. Toremove the caution message, touch the screen.You can also display the picture from the rear viewcamera manually without shifting the gear to thereverse (R) position.On the pop-up short-cut menu, touch as follows:Other External ComponentsOther External ComponentsAV-INConnecting an external componentSee page 46 for more information.Starting playback1 Select “AV-IN” as the source.2 Turn on the connected component andstart playing the source.Changing the AV-IN nameYou can change the AV-IN name displayed on thesource control screen.• This setting does not affect the source namedisplayed on the Home screen.1 Display the

On the source control screen, touch as follows:2 Select an AV-IN name.Operations while the camera screen isdisplayedTo adjust the pictureTouch the area shown below.Video menu control is shown. For details, see “Videomenu control operations” on page 12.• To exit video menu control, touch the same areaagain.To display parking guide lineSet to [ON] (Page 37) ortouch the area shown below.• To close the parking guidelines, touch the same areaagain.To exit the camera screenPress HOME on the monitor panel or touch the areashown below.25ENGLISH