| 
Bluetooth®Bluetooth®2 Select the device (1) you want to connect,then select [Connection] (2).3 Select the device (1) to connect, thenreturn to the (2).Select [ON] (to connect) or [OFF] (to disconnect).: Mobile phone: Audio device4 Connect the selected device.• The status is shown as follows:– : Connection is in progress.– : A connection has been established.– : A connection can beestablished.– : Disconnection is in progress.– : No connection is established.• When a Bluetooth mobile phone is connected, thesignal strength and battery level are displayed whenthe information is acquired from the device.To delete the registered device: Perform step 1,select the device you want to delete in step 2, thentouch [Remove].• A confirmation message appears. Touch [Yes].Bluetooth mobile phoneWhen a call comes in...Touching the operation keys performs the followingactions:[ ] Answers a call.[ ] Rejects a call.• Call information is displayed if acquired.• Phone operation is not available while the picturefrom the rear view camera is displayed.• When receiving a call during navigation guidance(only for DDX4018DAB/DDX4018BT), the screen isswitched automatically.– To return to the navigation screen, touch [ ].During a call...Touching the operation keys performs the followingactions:[ ] Ends a call.[ ]/[ ]Switches between handsfree mode andphone mode.[DTMF] Enters DTMF (Dual Tone MultiFrequency), then sends text using thekeypad.NR LEVEL[–] / [+]Adjusts the noise reduction level.(–5 to 5, initial 0)EC LEVEL[–] / [+]Adjusts the echo volume level.(–5 to 5, initial 0)MIC LEVEL[–] / [+]Adjusts the volume level of themicrophone. (–10 to 10, initial –4)• Press + / – buttons on the monitor panel to adjustthe volume of the call or earpiece.28 ENGLISH |
