Kenwood DDX419BT Instruction Manual

Also see for DDX4019BT: Instruction manual

Listening to the radioThe unit switches to FM alarm scene automaticallywhen receiving an alarm signal from FM broadcast.Playback information on the source controlscreenRadio1 Selects the band (AM/FM1/FM2/FM3)2 Current station frequency/RDS status3 Text information• Touching [<] scrolls the text if not all of the textis shown.• Touching [Radio Text] switches the informationbetween Radio Text, Radio Text Plus and PTYcode.4 Displays the preset stations window (Page 17)5 [P1] – [P5]• (Touch) Selects a preset station.• (Hold) Presets the current station.6 Displays/hides other available operation keys*7 NEWS indicator8 AF indicatorRadioRadio9 TI indicatorp Operation keys*q ST/MONO indicatorThe ST indicator lights up when receiving an FMstereo broadcast with sufficient signal strength.w Seek mode indicatore LO.S indicatorr RDS indicatort EON indicatorThe EON indicator lights up when a Radio DataSystem station is sending EON signals.* See the following “Operation keys on source control screen”.Operation keys on source control screen• The appearance of the operation keys may differ,however the similar operation keys have the sameoperations.• See also “Common operation keys on source controlscreen” on page 8.Touching the operation keys performs the followingactions:6[AME ] (Hold) Presets stations automatically.[MONO]*1 Activates monaural mode for better FMreception (stereo effect will be lost).• The MONO indicator lights up whilemonaural mode is activated.• To deactivate, touch [MONO] again.[TI]*1 (For FM RDS features)Activates TI standby reception mode.• When TI is activated, the unit is readyto switch to traffic information ifavailable. The TI indicator lights up inwhite.• If the TI indicator lights up in orange,tune into another station providingRadio Data System signals.• The volume adjustment for TrafficInformation is automaticallymemorized. The next time the unitswitches to Traffic Information, thevolume is set to the memorized level.• To deactivate, touch [TI] again.[MODE]*1 Changes the settings for radio receptionon the screen.p[PTY]*1*2 (For FM RDS features)Enters PTY search mode.1 Touch [PTY].2 Touch and hold a PTY code to searchfor.If there is a station broadcasting aprogram of the same PTY code as youhave selected, that station is tuned in.[SEEK] Changes the seek mode for [S]/[T].• AUTO1 (Initial): Auto search• AUTO2: Tunes in preset stations oneafter another• MANU: Manual search16 ENGLISH