2 Put the unit in standby.On the source/option selection screen, touch asfollows:Turning off the screenOn the monitor panel(Hold)To turn on the screen: Press DISP OFF on themonitor panel or touch the screen.On the pop-up short-cut menu1 Display the pop-up short-cut menu.2 On the pop-up short-cut menu, touch asfollows:To turn on the screen: Touch the screen.Basic OperationsBasic OperationsHow to reset your unitIf the unit fails to operate properly, press the resetbutton.Turning on the powerTurning off the power(Hold)Putting the unit in standby1 Display the source/option selectionscreen.On the Home screen, touch as follows:Adjusting the volumeDDX419BT/DDX419BTMYou can adjust the volume (00 to35) by pressing J to increase andpressing K to decrease.• Holding J increases the volumecontinuously to level 15.DDX4019BTYou can adjust the volume (00to 35) by turning the knob to theright to increase and to the left todecrease.Attenuating the soundDDX4019BT(Hold)DDX419BT/DDX419BTMThe ATT indicator lights up.To cancel attenuation:For DDX419BT/DDX419BTM: Press and hold the samebutton again.For DDX4019BT: Press the same button again.4 ENGLISH