Kenwood DDX419BT Instruction Manual

Also see for DDX4019BT: Instruction manual

Other External ComponentsOther External ComponentsConnectionWhen you connect a Bluetooth device to the unit forthe first time:1 Register the device by pairing the unit and thedevice.2 Connect the device to the unit. (Page 23)Registering a new Bluetooth devicePairing allows Bluetooth devices to communicate witheach other.• The pairing method differs depending on theBluetooth version of the device.– For devices with Bluetooth 2.1:You can pair the device and the unit using SSP(Secure Simple Pairing) which only requiresconfirmation.– For devices with Bluetooth 2.0:You need to enter a PIN code both on the deviceand unit for pairing.• Once the connection is established, it is registered inthe unit even if you reset the unit. Up to five devicescan be registered in total.• Two devices for Bluetooth phone and one forBluetooth audio can be connected at a time.However, when “BT Audio” is selected as the source,you can connect up to five Bluetooth audio devicesand switch between these five devices.• To use the Bluetooth function, you need to turn onthe Bluetooth function of the device.Bluetooth®Bluetooth®InformationBluetooth is a short-range wireless radiocommunication technology for mobile devices such asmobile phones, portable PCs and other devices.Bluetooth devices can be connected without cablesand communicate with each other.Note• While driving, do not perform complicatedoperations such as dialing numbers, using the phonebook, etc. When you perform these operations, stopyour car in a safe place.• Some Bluetooth devices may not connect to this unitdepending on the Bluetooth version of the device.• This unit may not work for some Bluetooth devices.• Connecting conditions may vary depending on yourenvironment.• For some Bluetooth devices, the device isdisconnected when the unit is turned off.• If your mobile phone supports PBAP (Phone BookAccess Profile), you can display the following itemson the touch panel when the mobile phone isconnected.– Phone book– Dialed calls, received calls, and missed calls (up to10 entries in total)PreparationFor DDX419BT:Select the microphone (built-in or external) to use. See on page 28.For DDX419BTM/DDX4019BT:Connect and install the microphone beforehand. Fordetails, see page 44.Viewing the navigation screen• For settings to use a navigation unit, see page 34.Select “NAV” as the source.On the Home screen, touch as follows:• While the navigation screen is displayed, the touchpanel operations are available only for navigation.• The aspect ratio of the navigation screen is fixedto regardless of the setting.(Page 12).When receiving a call during navigation guidanceThe screen is switched automatically. To return to thenavigation screen, touch [ ].To exit the navigation screenOn the pop-up short-cut menu (Page 8), touch[Current Source].22 ENGLISH