| 
Using cameraInstall the front view camera or rear view camera(separately purchased) in the appropriate positionaccording to the instructions supplied with yourcamera.Connecting the cameraSee page 43 for more information.• To use the rear view camera, a reverse lead (REVERSE)connection is required. (Page 44)Using the camera• For settings, see or Camera> on page 33.To display the rear view camera screenThe rear view screen is displayed by shifting the gearto the reverse (R) position when Interruption> is set to [ON]. (Page 33)• A caution message appears on the screen. Toremove the caution message, touch the screen.You can also view the front view screen when youshift the gear from the reverse (R) position to any otherpositions. See on page33.Other External ComponentsOther External ComponentsTo display the camera screen manually• When is set to [ON], the picturefrom the front view camera is displayed. (Page 33)• When is set to [OFF], the picturefrom the rear view camera is displayed. (Page 33)On the pop-up short-cut menu, touch as follows:Operations while the camera screen isdisplayedTo switch the screen between front view cameraand rear view cameraTouch the area shown below.To adjust the pictureTouch the area shown below.Video menu control is shown. For details, see “Videomenu control operations” on page 11.• To exit video menu control, touch the same areaagain.To display parking guidelinesSet to [ON] (Page 33) ortouch the area shown below.• To close the parking guidelines, touch the same areaagain.To exit the camera screenPress HOME on the monitor panel or touch the areashown below.Using an external navigation unit(Not applicable for Indonesian models)You can connect an external navigation unit (KNA-610or KNA-G630: optional accessory) to the NAV inputterminal so that you can view the navigation screen.(Page 43)• The navigation guidance comes out of the frontspeakers even when you are listening to an audiosource.21ENGLISH |
