REVERSEPRK SW*1¥REMOTE CONTSTEERING WHEELREMOTE INPUTP.CONTANT.CONTILLUMIMUTE]*2Installation and ConnectionInstallation and ConnectionWiring connection10 A fuseConnect the antenna cord to the antenna terminalUSB input terminal (1 m)Front view camera inputPurple with white stripeWhite ] / White with black stripe [Green ] / Green with black stripe [Gray ] / Gray with black stripe [Purple ] / Purple with black stripe [Orange with white stripeBrownLight blue with yellow stripeBlue with white stripe (12 V 350 mA)Red (Ignition wire)Yellow (Battery wire)Black (Ground wire)Light greenTo the car’s reverse lamp harness when using the optional rear view cameraTo the car light control switchNot used.To rear speakers (right)To front speakers (right)To rear speakers (left)To front speakers (left)Car batteryCar fuseTo the car chassisTo the OE remote adapter (not supplied) which is compatible with your carTo the power control terminal when using the optional power amplifier (Or)To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antennaExtension wire ( ø )To the car’s parking brake detection switch harness(For best safety, be sure to connect the parking sensor.)Ignition key switch*1 Not available for Indonesian models.*2 Supplied only for DDX419BTM/DDX4019BT.44 ENGLISH