SettingsSettingsAdjust the sound effect.Adjusts loudness.• OFF (Initial)/Low/HighSelects the bass boost level.• OFF (Initial)/Level 1/Level 2/Level 3/Level 4/Level 5Reduces the driving noise by raising the bandwidth.• OFF (Initial)/ON*1Virtually enhances the sound space using the DigitalSignal Processor (DSP) system. Select the enhancelevel.• OFF (Initial)/Small/Medium/Large*2Restores the sound lost due to audio compression to arealistic sound.• OFF/ON (Initial)Virtually makes the sound more realistic using theDigital Signal Processor (DSP) system. Select the soundlevel.• OFF (Initial)/Level 1/Level 2/Level 3Moves the center of the sound to the lower or higherpoint. Select the height.• OFF (Initial)/Low/Middle/High*1 You cannot change the setting when “Radio” is selected as thesource.*2 This function works only when “DISC”/ “USB”/ “iPod”/“Android™” is selected as the source.Touch [J]/[K]/[H]/[I] or drag the mark to adjust.Adjusts the front and rear speaker output balance.When using a two-speaker system, set the fader to thecenter (0).• F15 to R15 (Initial: 0)Adjusts the left and right speaker output balance.• L15 to R15 (Initial: 0)To clear the adjustment: Touch [Center].Store your own sound adjustments1 Select a preset sound mode.2 Select a band (1) and adjust the level (2),then adjust the sound (3).Equalizer SRC NamePreset[dB]0+3+5+7+9-962.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz]-7-5-3NaturalBass EXTSW LEVELQ factor 1.50ON OFF EQ INITALL SRCAdjust the sound as follows:Adjusts the width of the frequency.• 1.35/1.5 (Initial)/2.0Activates/deactivates bass.• ON/OFF (Initial)Adjusts the subwoofer level.*• –50 to +10 (Initial: 0)• To clear the adjustment, touch [EQ INIT].3 Repeat step 2 to adjust the level of otherbands.* Not adjustable when is selected for subwoofer on the screen. (Page 30)29ENGLISH
