Kenwood DNX7310BT Instruction Manual

Contents

4646 47Return to the Top pageRadio, TVReturn to the Top pageRadio, TVTV Basic OperationMost functions can be controlled from the source control screen and TV screen.NOTE• Set the remote controller mode switch to TV mode before starting operation, see Switching the operation mode(P.95).• You can only operate TV with the optional accessory TV tuner KTC-V500N/PV300/N/P connected.• During playback, press the button to display the source control screen.12 23 341Simple Control screen List Control screen551 Information display/Control switching areaDisplays the following information.• [TV1], [TV2]: Band display• Preset #: Preset number• Group: TV area group• #ch: Channel displayTouching this area switches between the Simple Control and List Control screen.2 Multi function keyTouch to switch the multi function menu. For details on the menu, see Multi function menu (P.47).3 Preset key (analog TV only)/Multi function menuRecalls the memorized channel. When touched for 2 seconds, store the current receiving station orchannel in memory.When switched, various functions can be performed by using keys in this area.For details on the menu, see Multi function menu (P.47).4 Preset list (analog TV only)Displays the list of preset channels.5 Sub function menuThe following function can be performed by using keys in this area.• Hide all keys: Touch [ ].• Switches the channel: Touch [4] [¢].• Switches the band: Touch [BAND].TV screen6 67 86 Switching channel areaTouch to switch the channel.7 Switching band areaTouch to switch the band.8 Key display areaTouch to display the last control screen.Multi function menuAnalog TV Digital TVThe functions of each key are as follows.[P1] - [P6] (analog TV only)Selects the preset channel. Touch for 2 seconds to store the current station into the preset memory.[ ]Displays the list of preset channels.[4] [¢]Switches the channel.[BAND] (analog TV only)Touch to switch the band.[SEEK] (analog TV only)Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].• AUTO1: Tunes in channels with good reception automatically.• AUTO2: Tunes in channels in memory one after another.• MANUAL: Switches to the next channel manually.[AME]Selects the auto memory mode. For details, see Auto memory (P.49).[ SETUP]Touch to display the SETUP Menu screen. See Setting Up (P.68).[ AUDIO]Touch to display the Audio Control screen. See Controlling Audio (P.82).Continued