Kenwood DNX7310BT Instruction Manual

Contents

5252 53Return to the Top pageRadio, TVReturn to the Top pageRadio, TVTuner SetupYou can set tuner related parameters.This function is available for models withregion code 2 or 3.1 Touch [ ] in the control screen.Multi function menu appears.2 Touch [SETUP] in the multi functionmenu.SETUP Menu screen appears.3 Touch [Source].Source SETUP Menu screen appears.4 Touch [TUNER SETUP] in the list.TUNER SETUP screen appears.5 Set each item as follows.NEWSSets a news bulletin interrupt time. Default is“OFF”.AFWhen station reception is poor, automaticallyswitches to the station that is broadcastingthe same program over the same Radio DataSystem network. Default is “ON”.RegionalSets whether to switch to the station onlyin the specific region using the “AF” control.Default is “ON”.Auto TP SeekWhen traffic information station reception ispoor, automatically searches for a station thatcan be received better. Default is “ON”.Language SelectSelects a display language for the PTY function.Antenna Control SETUPAllows you to turn off the Radio Data Systemfunction to prevent the motor-driven antennafrom extending. Default is “ON”.TV SetupYou can set the TV signal receiving areas.NOTE• Each operation in this section can be started fromthe Top Menu screen. For details, see OperatingWith The Top Menu Screen (P.16).1 Touch [ ] in the control screen.Multi function menu appears.2 Touch [SETUP] in the multi functionmenu.SETUP Menu screen appears.3 Touch [Source].Source SETUP Menu screen appears.4 Touch [TV SETUP] in the list.TV SETUP screen appears.5 Set each item as follows.TV1 Area/TV2 AreaSets the present TV1 or TV2 receiving area.Touch [SET], and select the area and number.This function is available only whenKTC-V500N/PV300/N/P optional accessory isconnected.On Screen TVSets how to display the information of the TV.Auto (Default): Information appears for 5seconds when updated.OFF: Does not display any information.