Kenwood DNX7310BT Instruction Manual

Contents

8484 85Return to the Top pageAudio Setting UpReturn to the Top pageAudio Setting UpCrossover network setupYou can set a crossover frequency ofspeakers.1 Touch the speaker to set the crossoverin the Speaker Select screen.2 Touch [X’over].X’over screen appears.3 Set each item as follows.Phase*Sets the phase of subwoofer output.The phase is reversed 180 degrees when set to“Reverse”.HPF FREQHigh Pass Filter adjustment. (When front or rearspeaker is selected on Speaker Select screen)LPF FREQLow Pass Filter adjustment. (When subwooferis selected on Speaker Select screen)SlopeSets a crossover slope.* This function is available in the specificsituation.Only when “Subwoofer” isset to other than “None” in “Speaker Setup”.Only when “Subwoofer” is set to“ON” in “Speaker Setup” and “LPF FREQ” isset to other than “Through”.When Speaker network is set to 3 way(DNX7310BT/ DDX7031BT):Range switching area (graph)Selects the band for setting gain, frequencyfilter, and slope.Touch the left arc to set the LPF, the center arcto set the BPF, and the right arc to set the HPF.Phase*Sets the phase of tweeter, mid range, andwoofer output.The phase is reversed 180 degrees when set to“Reverse”.GainSets gain of each speaker.HPF FREQHigh Pass Filter adjustment. (When tweeter isselected on Speaker Select screen)BPF FREQBand Pass Filter adjustment. (When mid rangespeaker is selected on Speaker Select screen)LPF FREQLow Pass Filter adjustment. (When woofer isselected on Speaker Select screen)SlopeSets a crossover slope.* Only when “Subwoofer” is set to “ON” in“Speaker Setup”.NOTE• For how to switch to the 3-way speaker system,see 3 way speaker system setup (P.32)in the Quick Start Guide. Connecting 3-wayspeakers with the 2-way mode selected can breakthe speakers.Car type setupYou can setup the car type and speakernetwork, etc.1 Touch [Car Type] in the Audio SETUPscreen.Car Type screen appears.2 Select your car type from the list.NOTE• If your car type is selected, the Delay TimeAlignment is set automatically (for timingadjustment of sound output for each channel) tohave the highest surround effects.Speaker location setup1 In the Car Type screen, touch[Location].Speaker Location screen appears.2 Select the speaker locations using[3].Front SpeakerSelect the location from “Door”/ “On Dash”/“Under Dash”.Rear SpeakerSelect the location from “Door”/ “Rear Deck”,“2nd Row”/ “3rd Row” (Minivan, Minivan(Long)).When Speaker network is set to 3 way(DNX7310BT/ DDX7031BT):Mid RangeSelect the location from “Door”/ “On Dash”/“Under Dash”.