Kenwood DNX7310BT Instruction Manual

Contents

1414 15Return to the Top pageBasic OperationsReturn to the Top pageBasic OperationsSD cardPress the <0> button for 1second to open the front panel.0The panel fully opens.Hold the SD card as the diagrambelow and insert it into the slotuntil it clicks.Notched sectionLabeled sideThe unit loads the card and playbackstarts.● To remove:Push the SD card until it clicks and thenremove your finger from the card. Thecard pops up so that you can pull it outwith your fingers.External deviceInsert the plug into the AV-IN jack.Detaching The FrontPanelYou can detach the front panel to preventtheft.Press the <0> button for 1 secondto open the front panel.0NOTE• You can set the front panel to open automaticallywhen the ignition is turned off. See Monitorangle control (P.75).Detach the panel as the diagramsbelow.2314NOTE• The attaching plate closes automatically in about10 seconds after the front panel is released.Remove the panel before this happens.12112Detach the panel as the diagramsbelow.12● After detaching:Put the panel in the protective bagsupplied with the unit.NOTE• To prevent deterioration, do not touch theterminals of the unit and faceplate with yourfingers.• If the terminals on the unit or faceplate get dirty,wipe them with a clean soft dry cloth.Attaching the front panelHold the panel securely so as notto drop it accidentally, and fit itonto the attaching plate until it isfirmly locked.112121 1