Kenwood DNX7330BT Instruction Manual

2828 29Return to the Top pageDVD, VCDReturn to the Top pageDVD, VCDDVD SetupYou can set up the DVD playback functions.NOTE• Each operation in this section can be started fromthe Top Menu screen. For details, see Operatingwith the Top Menu Screen (P.16).1 Touch [ ] in the control screen.Multi function menu appears.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Source].Source SETUP Menu screen appears.4 Touch [DVD SETUP] in the list.DVD SETUP screen appears.5 Set each item as follows.Menu/Subtitle/Audio Language*See Language setup (P.29).Dynamic Range Control*Sets the dynamic range.Wide: The dynamic range is wide.Normal: The dynamic range is normal.Dialog (Default): Makes the total soundvolume larger than othermodes. This is effective onlywhen you are using DolbyDigital software.Angle MarkSets an angle mark display.ON (Default): An angle mark appears.OFF: An angle mark does not appear.Screen Ratio*Sets the screen display mode.16:9 (Default): Displays wide pictures.4:3 LB: Displays wide pictures in the Letter Boxformat (having black stripes at the topand bottom of screen).4:3 PS: Displays wide pictures in the Pan &Scan format (showing pictures cut atthe right and left ends).Parental Level*See Parental level (P.29).DISC SETUPSee Disc setup (P.30).Stream InformationDisplays the present source information.The stream (Dolby Digital, dts, Linear PCM,MPEG, WMA or AAC) appears.* These items are disabled when a DVD isbeing played.Language setupThis setting is for the language used in themenu, subtitle, and voice. You cannot setupthese items during DVD playback.1 Touch [SET] of the desired item;[Menu Language], [Subtitle Language],[Audio Language].Language Set screen appears.2 Enter the desired language code andtouch [Enter].Sets the entered language and returns tothe DVD SETUP screen.NOTE• To cancel the setup and return to the previousscreen, touch [Cancel].• To clear the entered code, touch [Clear].• To set the DVD’s original language for audiolanguage, touch [Original].Parental levelSets a parental level. You cannot setup thisitem during DVD playback.1 Touch [SET] of [Parental Level].Parental Pass screen appears.2 Enter the parental code and touch[Enter].Parental Level screen appears.NOTE• To cancel the setup and return to the previousscreen, touch [Cancel].• To clear the entered code, touch [Clear].• Current parental level appears as [Level#].3 Touch [2] or [3] to select a parentallevel.NOTE• If a disc has higher parental lock level, you needto enter the code number.• The parental lock level varies depending on aloaded disc.• If a disc has no parental lock, anybody can play itback even when you have set the parental lock.