Kenwood DNX7330BT Instruction Manual

5252 53Return to the Top pageCD, Disc, iPod, USB deviceReturn to the Top pageCD, Disc, iPod, USB deviceiPod setup1 Set each item as follows.AudioBook SpeedSets the audio book playback speed. Selectfrom [Slow], [Normal] (default), and [Fast].Wide Screen*Sets Wide Screen. Set [ON] (default) or [OFF].On Screen iPodSets how to display the information of theiPod.Auto (Default): Information appears for 5seconds when updated.OFF: Does not display any information.* This setting is not available when an iPod isconnected.DivX VOD1 Set each item as follows.DivX(R) Registration CodeChecks the registration code. This code isneeded when making a disc which has DRM(Digital Rights Management).DivX(R) DeactivationDeregisters the unit which is already registered.After you touch the key, a confirmationmessage appears. Follow the message andcomplete the operation.NOTE• [DivX(R) VOD] is disabled when a disc is beingplayed.• When downloading a DivX VOD file controlledby DRM, register the code appeared on thescreen. Otherwise the file may not be able to playwith this unit. Remaining number of viewing isdisplayed when playing a DivX VOD file with theviewing restriction. When the used number ofviewing reached maximum number, a warningmessage appears and the file cannot be played.USB/iPod/DivX SetupYou can perform setup when using USB/iPod/ DivX.NOTE• Each operation in this section can be started fromthe Top Menu screen. For details, see Operatingwith the Top Menu Screen (P.16).1 Touch [ ] in the control screen.Multi function menu appears.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Source].Source SETUP Menu screen appears.4 Touch [USB], [iPod] or [DivX] in the list.Each setup screen appears.See the following section for each setting.• USB setup (P.52)• iPod setup (P.53)• DivX VOD (P.53)USB setup1 Set each item as follows.Picture Display TimeSelects length of time to display JPEG picturefile in the screen. Select from [Short], [Middle],and [Long] (default).On Screen USBSets how to display the information of the USBdevice.Auto (Default): Information appears for 5seconds when updated.OFF: Does not display any information.