Kenwood DNX7330BT Instruction Manual

8282 83Return to the Top pageSetting UpReturn to the Top pageSetting UpUser interfaceYou can setup user interface parameters.1 Touch [User Interface] in the list.User Interface screen appears.2 Set each item as follows.BeepTurns the key touch tone on or off.Default is “ON”.Remote SensorSelects a remote control signal. Default is “ON”.LanguageSelect the language used for the controlscreen and setting items. See Language setup(P.83).Text ScrollAllows scrolling of text display on the sourcecontrol screen. Select from “Auto”/”Once”/”OFF”.Auto (Default): Scrolls the text automatically.Once: Allows you to scroll the text only onceautomatically when updated.OFF: Does not scroll the text automatically.Drawer CloseSets whether to close the common menu(P.16) automatically. Default is “Auto”.TEL Key Longer than 1 SecondYou can set the operation performed whenthe TEL key is pressed for 1 second. Select from“Voice”/”V.OFF”/”R-CAM”.Voice (Default): Displays the Voice Recognitionscreen. (P.82).V.OFF: Turn the display off.R-CAM: Switches to the rear view camera videodisplay.AnimationSets whether to display animation. Default is “ON”.SecondarySets whether to display the navigationinformation in the audio screen or vice versa.Default is “ON”.Steering Remote ControllerSets the desired function in the steering remotecontroller. See Learning function of steeringremote (P.83).Travel Prayer for Safe Drive(DNX7330BTM/ DNX5330BTM only）When this function is set, the prayer for drivingsafety is displayed when the unit is turned on,then Quran is played. See Travel Prayer forSafe Drive Setting (P.84).Language setup1 Touch [SET] of [Language] in the UserInterface screen.Language Setting screen appears.2 Set each item as follows.Select ModeSelects the mode to select a language.Easy (Default): Selects a language easily.Advanced: Allows you to select languages forrespective items.*Language SelectSelects a language.* If you select [Advanced] for Select Mode,the following screen appears.GUI Language Select:Selects the display language used for thecontrol screen and so forth.Navigation Language Select:Selects the language used for navigation.Text Language Select:Selects the language used for tag text (songinformation).3 Touch [Enter].NOTE• To cancel the language setup, touch [Cancel].Learning function of steering remoteThis function is available only when yourvehicle is equipped with the electricalsteering remote controller.If your steering remote controller is notcompliant, learning may not be completedand error message may appear.1 Touch [SET] of [Steering RemoteController].Steering Remote Controller Setting screenappears.2 Press the steering remote controllerbutton you want to set the function.NOTE• You can have the unit learned all buttons at atime. In that case, press the all buttons one at atime and after pressing all of them, touch [Done]in Steering Remote Controller Setting screen.However, new functions cannot be learned afterthis operation.3 Touch the function you want to set.4 Repeat steps 2 and 3 as necessary.5 Touch [Done].NOTE• When changing the function already learned,touch the button you want to change in step 2and then touch to select the changed functionfrom the function list.• Confirm the contents of the settable function onthe function list. You cannot edit the function list.• To initialize the contents, touch [Initialize] of[Steering Remote Controller] in User Interfacescreen. After you touch [Initialize], a confirmationmessage appears. Follow the message andcomplete the operation.