Kenwood DNX7330BT Instruction Manual

9292 93Return to the Top pageSetting UpReturn to the Top pageSetting UpAV-IN1 Name/AV-IN2 Name*2Sets a name to be displayed when you selecta system that is connected via the AV INPUTport. Default is “VIDEO”.*1 This item can be set when in STANDBYsource and also the iPod is disconnected.*2 [AV-IN2 Name] becomes settable when“AV-IN2” is selected in [iPod AV InterfaceUse].AV Output Interface SetupYou can select an AV source to be output atthe AV OUTPUT port. Default is “VIDEO1”.1 Touch [Menu] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [AV-OUT].AV-OUT Interface screen appears.4 Touch [2] or [3] to set [AV-OUT] toVIDEO, DISC, TV , iPod, or OFF.Software InformationCheck the software version of this unit.1 Touch [Menu] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Software].Software Information screen appears.4 Confirm the software version. Touch[Update] as necessary.NOTE• For how to update the software, see the relevantupdate procedure manual which comes with thesoftware.AV Input SetupYou can set AV input parameters.1 Touch [Menu] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Source].4 Touch [AV-IN SETUP] in the list.AV-IN SETUP screen appears.5 Set each item as follows.iPod AV Interface Use*1Sets the terminal which iPod is connected.Setting values are iPod and AV-IN2.iPod (Default): Set this when an iPod isconnected using KCA-iP202connector. You can listen toaudio or watch video in youriPod as iPod source.AV-IN2: Set this when an iPod is connectedusing KCA-iP102 connector.You canlisten to audio in your iPod as iPodsource. You can also listen to audio orwatch video output from a AV deviceas AV-IN2 source.