Kenwood DNX7330BT Instruction Manual

8484 85Return to the Top pageSetting UpReturn to the Top pageSetting UpTravel Prayer for Safe Drive Setting(DNX7330BTM/ DNX5330BTM only)When this function is set, the prayer fordriving safety is displayed when the unit isturned on, then Quran is played.1 Touch [SET] of [Travel Prayer for SafeDrive] in the User Interface screen.Travel Prayer for Safe Drive Setting screenappears.2 Set each item as follows.Travel Prayer for Safe DriveTurns the Safe drive pray function on or off.Sound VolumeSets the sound volume of Quran.Touch panel adjustment1 Touch [Touch] in the System Menuscreen.Touch Panel Adjustment screen appears.2 Follow the instruction on the screenand touch the center of each .NOTE• To cancel the touch panel adjustment, touch[Cancel].• To reset to the initial status, touch [Reset].Security setupYou can set up a security code to protectyour receiver system against theft.NOTE• When the Security Code function is activated, thecode cannot be changed and the function cannotbe released. Note the Security Code can be set asthe 4 digit number of your choice.1 Touch [Security] in the System Menuscreen.Security screen appears.2 Touch [ON] of [SI].NOTE• If “SI” is turned on, the SI indicator on the subpanel flashes when the vehicle ignition is off andthe panel is detached ( ). Default is “ON”.3 Touch [SET] of [Security Code Set].NOTE• If you have already completed the coderegistration, [CLR] is displayed.4 Enter a security code with four-digitnumber and touch [Enter].5 Enter the same code again and touch[Enter].Security code is registered.NOTE• If you enter a different security code, the screenreturns to step 4 (for the first code entry).• If you have pressed button or if youhave disconnected the Receiver from battery,enter the correct security code as that you haveentered in step 4 and touch [Enter]. You can useyour receiver.