English | 11Station/Disc Naming (SNPS/DNPS)Attaching a title to a Station or CD.1 Receive/play the station/disc you want toattach a title to2 Select Name set mode item during MenumodeSelect the “Name Set” display.For how to select Function Control items, refer to (page 6).3 Enter Name set modePress the Control knob for at least 1 second.4 Enter the nameOperation type OperationMove the cursor to the entercharacter positionPush the Control knob towards rightor left.Select the character type* Press the Control knob.Select the characters Turn the Control knob or push ittowards up or down.* Each time you press the knob, the character typealternates between the types shown in the table below.Character type Alphabet upper caseAlphabet lower caseNumbers and symbolsSpecial characters (Accent characters)⁄• Enter characters by using a remote control with numbersbuttons.Example: If you are entering “DANCE”.Character “D” “A” “N” “C” “E”Button [3] [¢] [2] [¢] [6] [¢] [2] [¢] [3]Times pressed 1 1 2 3 25 Exit Menu modePress the [FNC] button.⁄• A title cannot be attached to Audio file media.• When operation stops for 10 seconds the name at thattime is registered, and Name Set mode closes.• Memory numbers- FM/AM: 30 stations- Internal CD player: 10 discs- External CD changer/ player: Varies according to theCD changer/ player. Refer to the CD changer/ playermanual.• Change the title of station/CD by the same operationused to name it.Opening message editSetting the opening message to be displayed whenthe power is turned on.1 Select Opening message edit item duringMenu modeSelect “OPENING MSGE Edit”.For how to select Function Control items, refer to (page 6).2 Enter Opening message edit modePress the Control knob for at least 1 second.3 Enter the characterOperation type OperationMove the cursor to the entercharacter positionPush the Control knob towards rightor left.Select the character type* Press the Control knob.Select the characters Turn the Control knob or push ittowards up or down.* Each time you press the knob, the character typealternates between the types shown in the table below.Character type Alphabet upper caseAlphabet lower caseNumbers and symbols4 Press the Control knob for at least 2 seconds.“Completed” is displayed.5 Exit Menu modePress the [FNC] button.⁄• The Opening message can be displayed up to 8characters.
