English | 9In Audio file sourceInformation DisplayMusic title & Artist name “Title/Artist”/”TITLE”Album name & Artist name “Album/Artist”/”ALBUM”Folder name “Folder Name”/”FOLDER”File name “File Name”/”FILE”Play time & Music number “P-Time”/”P-TIME”Spectrum Analyzer & Clock “Speana/Clock”/”SPEANA”Date “Date”/”DATE”Blank “Blank”/”BLANK”In StandbyInformation DisplayStandby “Source Name”/”SRC NAME”Clock “Clock”/”CLOCK”Date “Date”/”DATE”Blank “Blank”/”BLANK”In Auxiliary input sourceInformation DisplayAuxiliary input name “Source Name”/”SRC NAME”Spectrum Analyzer & Clock “Speana/Clock”/”SPEANA”Date “Date”/”DATE”Blank “Blank”/”BLANK”1 Enter Text Display Selection mode (In DisplayType A/ B/ C)Select “DISP” > “TEXT”.For how to select Function Control item, refer to (page 6).2 Select the text display partPush the Control knob towards up or down.The selected text display part blinks.3 Select the textTurn the Control knob or push it towards leftor right.4 Exit Text Display Selection modePress the [FNC] button.⁄• If the selected display item does not have anyinformation, alternative information is displayed.• Some items cannot be selected depending on thedisplay type and row.• When selecting “Folder Name” while playing withiPod, names will be displayed depending on currentlyselected browsing items.• When Display Type C is selected, “Speana” is displayedinstead of “Speana/Clock.”• “Frequency” can be selected only on the first line whilesetting the text.• When LX-AMP is connected, the item setup by theDisplay mode of LX-AMP is displayed.Illumination Color SelectionSelecting the Illumination Color of the panel.1 Enter Illumination Color Selection modeSelect “Color” .For how to select Function Control item, refer to (page 6).2 Select the place where you want to set theIllumination ColorPlace DisplayAll “All Color”Display “Display Color”Button “Key Color”Volume knob “Left Knob Color”Control konb “Right Knob Color”Save and recall the Illumination Colors you selectedfor each place“Color Preset”Turn the Control knob and push the centerwhen the desired item is displayed.3 Select the Illumination ColorTurn the Control knob and push the centerwhen the desired item is displayed.Select the color from “Variable Scan”/ “Color1”— “Color 10”/ “User”.Creating “User” colorYou can create your original color during theselection from “Color1” — “Color10.”The color you created can be called when youselect “User”.1. Press the Control knob for at least 1 second.Enter the detail color adjustment mode.2. Set the color.Operation type OperationTo select the color to adjust.(red, green, or blue)Push the Control knob towardsright or left.To adjust color. (Range: 0 – 9) Turn the Control knob or push ittowards up or down.3. Press the Control knob.Exit the detail color adjustment mode.4 Exit Key Color Selection modePress the [FNC] button.⁄• When you select “PRESET”, you can save the combinationof the Illumination Colors selected for each place. Forhow to save Illumination Colors, refer to Color Preset Memory> (page 10).
