24|KDC-610UEnglish|25information is added using KENWOOD Music Editor (<8-9.About “KENWOOD Music Editor Light” and “KENWOODMusic Control”> (page 25)).8-7. About the Audio file•Playable Audio filesAAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav)of USB device•Playable disc mediaCD-R/RW/ROM•Playable disc file formatsISO 9660 Level 1/2, Joliet, Long file name.•Playable USB devicesUSB mass storage class•Playable USB device file systemsFAT12, FAT16, FAT32Even if the audio files comply with the standardslisted above, playback may be impossible dependingon the type or condition of the medium or device.•Playback order of the Audio filesIn the example of folder/file tree shown below, filesare played in the order of number from (1) to (6).CD/USB(1)¡(1)23¡(4)4¡(2)¡(3)¡(6)5¡(5);: folder-: Audio fileFor the online manual describing audio files, visitwww.kenwood.com/cs/ce/audiofile/. In this onlinemanual, detailed information and notes which arenot provided in this manual are provided. Make sureto read through the online manual as well.What is a USB device?•In this manual, the term “USB device” indicates a flashmemory or digital audio player which has a USB terminal.Listen to the CD/ Audio file8-5. Playback modeYou can select a playback mode, such as Randomplay and Repeat play.1Press [SRC] and select a CD/ USB (“CD”/ “USB”)source using [Control] knob.Refer to (page 10).2Press [Control] knob.Enters the Function setting mode.3Select “Play Mode” using [Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 9).4Select a playback mode function using[Control] knob.DisplayDescription“Disc Random”(CD)/“FolderRandom”(Audio file)When set to“ON”, plays the songs inthe CD/folder randomly.*(ON) /i(OFF)“All Random”(Audio file)When set to“ON”, plays all songs in thedisc/USB randomly.*(ON) /i(OFF)“Track Repeat”(CD)/“FileRepeat”(Audio file)When set to“ON”, plays the selectedsong repeatedly.*(ON) /i(OFF)“Folder Repeat”(Audio file[1])When set to“ON”, plays the songs inthe folder repeatedly.*(ON) /i(OFF)[1]Except the Music Editor media5Press [Control] knob.The setting is changed.Exiting from the Function setting modePress and hold [1/6].8-6. Direct music search(Function of remote control)You can search for music by entering the tracknumber.1Press [DIRECT] on the remote control.“– – –” appears and enter the Direct Music searchmode.2Press the number buttons on the remotecontrol to enter the music number.3Press [ENT] on the remote control.Exiting the Direct music search modePress [6] on the remote control.This function cannot be used for a Music Editor media.•This function cannot be used for media for which database8-8. About the USB device•When the USB device is connected to this unit, it ischarged when this unit is powered.•Install the USB device in the place where it will notprevent you from driving your vehicle properly.•You cannot connect a USB device via a USB hub ormulti card reader.•Save backups of the audio files used with this unit.The files can be erased depending on the operatingcondition of the USB device.We shall not be liable for any damage arising out oferasure of the stored data.•No USB device comes with this unit. You need topurchase a commercially available USB device.•When connecting the USB device, use of theCA-U1EX (optional accessory) is recommended.•Normal playback is not guaranteed when a cableother than the USB compatible cable is used.Connecting a cable whose total length is longerthan 4 m can result in abnormal playback.8-9. About “KENWOOD Music EditorLight” and “KENWOOD Music Control”•This unit supports the PC application “KENWOODMusic Editor Light” (hereinafter “KME-Light”), andAndroid™ application “KENWOOD Music Control”(hereinafter “KMC”).•When you use the audio file with databaseinformation added by the “KENWOOD Music EditorLight” or “KENWOOD Music Control”, you can searchfor a file by title, album or artist name using MusicSearch.•“KENWOOD Music Editor Light” and “KENWOODMusic Control” are available from the following website: www.kenwood.com/cs/ce/8-10. About the discs used with thisunit•This unit can only play the CDs with.•The following discs cannot be used:- A discs that is not round- A discs with coloring on the recording surface or adisc that is dirty- A recordable/rewritable disc that has not beenfinalized (For the finalization process, refer tothe instruction manual that came with your discwriting software or your disc recorder.)- An 8 cm (3 inch) disc (An attempt to insert usingan adapter can cause malfunction.)8-11. Handling discs•Do not touch the recording surface of the disc.•Do not stick tape etc. on the disc, or use a disc withtape stuck on it.•Do not use any accessories for the disc.•Do not use any solvents to clean discs. Use a drysilicon or soft cloth.•Clean the disc by moving the cloth outward fromthe center of the disc.•When removing a disc from this unit, pull it outhorizontally.•If the center hole or outside rim of a disc has burrs,remove them before inserting a disc.
