8|KDC-610UEnglish|93. Basic operations3-1. Component names(1)(2)(4)(3)(5)(6)(7)(8)(9)(10)(11)(12)(1)[1/6] buttonWhen listening to the iPod, audio file, CD, or radio,press this button to enter the search mode.In each of the selected modes, press the button toreturn to the previous item.(2)[SRC] buttonPress this button to enter source select mode. Referto (3)[Control] knob (Volume knob)In the normal mode, turn the knob to adjust thevolume or press the knob to enter the Functionsetting mode.In the Function mode, turn the knob to select anitem or press the knob to determine the selection.(4)[R]/ [S] buttonPress the button to select an audio file folder or useit as a Likes/ Dislikes button on Pandora etc.The [R] button can be used to select broadcastband as well.(5)[G] buttonPress the button to eject the disc.(6)Disc slot coverWhen this cover opens upward, the disc insertionslot appears(7)USB terminal (inside of the cover)Connect an iPod or USB device.(8)Auxiliary input (inside of the cover)Connect the output of an external device using astereo mini-jack.(9)REAR USB indicatorWhen a USB device or iPod is connected to the USB3-2. PreparationsCancel the Demonstration modeCancel the Demonstration mode when you use theunit for the first time after installation.1Press [Control] knob to cancel theDemonstration mode when the message “Tocancel DEMO Press the volume knob” appears(approx. 15 seconds).2Turn [Control] knob to select the “YES”, andthen press [Control] knob.The Demonstration mode can also be canceledin the Function Setting mode. Refer to <11-5.Demonstration mode setting> (page 34).Detaching/ Attaching the faceplate!•Remove the faceplate at once after pressing theRelease button; otherwise it can fall down due tovibration.•The faceplate is a precision component of the unitand can be damaged by shocks or jolts.•Keep the faceplate in its case while detached.•Do not place the faceplate (and case) in areasexposed to direct sunlight, excessive heat orhumidity. Also avoid places with too much dust orthe possibility of water splashing.terminal of the rear, this indicator stays lit. Duringplayback of the connected device, this indicatorblinks.(10)[E]/ [F] buttonPress the button to select a song or station.(11)Release buttonPress the button to detach the faceplate.(12)[A~Z] buttonPress any of (A to Z) button during the Musicsearch mode to enter the alphabet search mode.3-3. How to select the itemFor how to select setting items such as a functionsetting item, see the following example:Example: Setting the Date format of the display1Press [Control] knob.“Function” appears and enters the Function settingmode.2Select the Date Mode function itemTurn [Control] knob to select “Settings”, andthen press [Control] knob.Next, turn [Control] knob to select “Clock&Date”,and then press [Control] knob.Finally, turn [Control] knob to select “DateMode”, and then press [Control] knob.To cancel and return to the previous item, press[1/6].3Turn [Control] knob to select a format (7types), and then press [Control] knob.Returns to the previous item.4Press and hold [1/6].Exits the Function setting mode.About the description in this manual•In this manual, operations performed in steps 2 and 3 aredescribed as follows:2. Select “Settings”>“Clock&Date”>“Date Mode”using [Control] knob.3. Select a format (7 types) using [Control] knob.