Kenwood KDC-610U Instruction Manual

Also see for KDC-610U: Quick start guide

Contents

10 | KDC-610U English | 113. Basic operations3-5. General operationsPowerPress [SRC] to turn the power ON.Press and hold [SRC] to turn the power OFF.Source selection1 Press [SRC].The currently selected source is displayed andenters the Source selection mode.2 Select a source using [Control] knob.Source DisplayStandby “STANDBY”SiriusXM (optional accessory)[1] “SiriusXM”Tuner “TUNER”USB device connected to front USB terminal “USB(FRONT)”USB device connected to rear USB terminal “USB(REAR)”iPod connected to front USB terminal[1] “iPod(FRONT)”iPod connected to rear USB terminal[1] “iPod(REAR)”Pandora® of iPod connected to front USBterminal[1]“Pandora(FRONT)”Pandora® of iPod connected to rear USBterminal[1]“Pandora(REAR)”iHeartRadio of iPod connected to front USBterminal [1]“iHeartRADIO (FRONT)”iHeartRadio of iPod connected to rear USBterminal [1]“iHeartRADIO (REAR)”CD[1] “CD”Auxiliary Input “AUX”[1] This source can be selected only when it can be played.Setting the source switching• Source switching can be set so that pressing [SRC] switchesamong sources. For more details, refer to <11-6. Initialsettings> (page 34).• Source switching can be set so that “Pandora”, “iHeartRADIO”and “AUX” sources can not be selected when not in use. Formore details, refer to <11-6. Initial settings> (page 34).VolumeTurn [Control] knob.USB terminalA USB device or iPod can be connected.The CA-U1EX (Max. 500mA) or KCA-iP102(optional accessories) is recommended toconnect a USB device or iPod.Auxiliary inputA portable audio device can be connected witha stereo mini-plug (3.5 mm ø).3-4. Adjusting the clock1 Press [Control] knob.Enters the Function setting mode.2 Select “Settings” > “Clock&Date” > “ClockAdjust” using [Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 9).3 Set the hour using [Control] knob.4 Set the minute using [Control] knob.Exiting from the Function setting modePress and hold [1/6].4. Audio adjustmentsAdjusting Bass, Middle, and Treble levels• You can set Bass, Middle, and Treble levels for each source.4-1. Audio controlYou can adjust the audio control items.1 Press [SRC] and select a source other thanStandby (“STANDBY”) using [Control] knob.Refer to (page 10).2 Press [Control] knob.Enters the Function setting mode.3 Select “Audio Control” using [Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 9).4 Select a audio control item using [Control]knob.Display Audio control item Range“SubWoofer Level” Subwoofer level –15 — +15 (dB)“Bass Level” Bass level –8 — +8 (dB)“Middle Level” Middle level –8 — +8 (dB)“Treble Level” Treble level –8 — +8 (dB)“Preset Equalizer” Preset Equalizer curve “Rock”/ “Pops”/ “Easy”/“Top40”/ “Jazz”/”Powerful”/ “Natural”/“User”[2]“Bass Boost” Bass Boost “OFF”/ “Level1”/“Level2”/ ”Level3”“Loudness” Loudness “OFF”/ “Level1”/“Level2”“Balance” Balance Left 15 — Right 15“Fader” Fader Rear 15 — Front 15“SubWoofer” Subwoofer output ON/ OFF“Detailed Settings”“HPF” High Pass Filter Through/ 100/ 120/150 (Hz)“LPF SubWoofer” Low Pass Filter 85/ 120/ 160/ Through(Hz)“SubWooferPhase”[3]Subwoofer Phase Reverse (180°)/Normal (0°)“Supreme”[4] Supreme setting OFF/ ON“Audio Preset” Audio Presetmemory[1]Recall/ Memory“Volume Offset” Volume offset –8 — ±0 (dB)(AUX: -8 — +8)[1] Refer to <4-2. Audio preset> (page 12), <4-3. Audiopreset recall> (page 12).[2] “User”: The customized Bass, Middle, and Treble settingsare effective.[3] Displayed only when “LPF SubWoofer” is set to ”85”/“120”/ “160”.[4] Audio file source only5 Select a value using [Control] knob.Exiting from the Function setting modePress and hold [1/6].