12|KDC-610UEnglish|134-3. Audio preset recallYou can recall the Audio control items registered tothe <4-2. Audio preset> (page 12).1Press [SRC] and select a recall source using[Control] knob.Refer to (page 10).2Press [Control] knob.Enters the Function setting mode.3Select “Audio Control” > “Detailed Settings” >“Audio Preset” > “Recall” using [Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 9).4Select “YES” using [Control] knob.“Recall Completed” appears.Exiting from the Function setting modePress and hold [1/6].4-2. Audio presetYou can register the values set the Audio controlitems.1Set the audio control itemsRefer to <4-1. Audio control> (page 11).2Select “Audio Control” > “Detailed Settings”> “Audio Preset” > “Memory” using [Control]knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 9).3Select “YES” using [Control] knob.“Memory Completed” appears.Exiting from the Function setting modePress and hold [1/6].Number of Audio preset memories that can be stored•Register a pair of Audio preset memories. You cannotregister them by source.When reset•When you press the Reset button, audio control values of allsources will be set to the values registered here.Audio control items that can be registered•The following Audio control items can be registered.“Bass Level”, “Middle Level”, “Treble Level”, “SubWoofer Level”,“HPF”, “LPF SubWoofer”, “SubWoofer Phase”4. Audio adjustments5. Listen to the iPod5-1. Models of iPods/iPhones thatcan be connected to this unitMade for•iPod nano (7th generation)•iPod nano (6th generation)•iPod nano (5th generation)•iPod nano (4th generation)•iPod nano (3rd generation)•iPod nano (2nd generation)•iPod nano (1st generation)•iPod with video•iPod classic•iPod touch (5th generation)•iPod touch (4th generation)•iPod touch (3rd generation)•iPod touch (2nd generation)•iPod touch (1st generation)•iPhone 5•iPhone 4S•iPhone 4•iPhone 3GS•iPhone 3G•iPhone•For information on the compatibility with iPod/iPhone software, visit www.kenwood.com/cs/ce/ipod/.•Types of available control vary depending on thetype of connected iPod. Visit www.kenwood.com/cs/ce/ipod/ for further details.•The word “iPod” appearing in this manual indicatesthe iPod or the iPhone connected with the iPodconnection cable (optional accessory).•Refer to the web site for connectable iPods and iPodconnection cables.www.kenwood.com/cs/ce/ipod/•When connecting devices featuring the Lightningconnector, KCP-iP102 (optional accessory) andApple Lightning to 30-pin Adapter are necessary.•Do not keep Apple Lightning to 30-pin Adapter inyour car to avoid the damage by heat.Notes•If you start playback after connecting the iPod, the musicthat was playing on the iPod is played first.In this case, “RESUMING” appears without displaying a foldername, etc. Changing the browse item will display a correcttitle, etc.•You cannot operate the iPod if “KENWOOD” or “ä” appearson the iPod.5-2. Playing musicPlaying a iPodConnect the iPod to the USB terminal using theKCA-iP102 (optional accessory).[1]Front USB terminal[2]Rear USB terminalYou can connect the iPod to either one of the USBterminals provided at the front and rear of this unit.If you connect a device to the USB terminalprovided at the rear, the “REAR USB” indicator stayslit.When it is connected, the source is switchedautomatically and playback starts.Selecting a songPress [E] or [F] button.Fast-forwarding or fast-backwarding a songPress and hold [E] or [F].Pause and play a songPress and hold [1/6].Removing iPodSwitch the source to a device other than iPod,Pandora, and iHeartRadio, and then removethe iPod.Data contained in the iPod may be damagedif you remove it when it is used as the activesource.When playback of iPod touch or iPhone does not start•If an unsupported application has started when connectingiPod touch or iPhone, “APP & iPod Mode” appears andsometimes playback does not starts. In this case, APP & iPodMode is set to “OFF”. Refer to <5-9. App & iPod mode settingsearch> (page 16).
