Kenwood KDC-8080R Instruction Manual

Also see for KDC-8080R: Service manual

Kenwood KDC-8080R Instruction Manual Manual pdf 11 page image

— 11 —• During vertical division mode displayThe upper part display is switched each time the DISP buttonis pressed.The lower part display is switched each time the CLK button ispressed.• The display items vary depending on the source that isplaying. For details refer to the "Switching Display" page forsource modes.• The same items cannot be selected for both the upper partand the lower part.• When the Black Mask function is turned on, the lower partdisplay shows the clock only.NOTEProgramme Service name/Station frequencyRadio textSpectrum Analyzer1Radio textSpectrum Analyzer2+ ClockSpectrum Analyzer2+ GraphicGraphic + ClockDateExample: Tuner modeDISP button CLK buttonUpper part displayLower part displayShut down the audio system temporarily whenever anincoming call is received.The function will not work if a cable is not connected to the carphone.When the telephone rings:When a call is received, "CALL" is displayed and all the unitfunctions are temporarily interrupted.Restoring Original Unit Source During Phone Call:Press the SRC button."CALL" disappears from the display, and the volume of theoriginal source is restored gradually.Turning TEL Mute Function Off After Phone Call:Hang the phone up."CALL" disappears from the display.The original source (i.e., the one used before the phone call) isreturned to automatically, and the volume restored gradually.NOTETEL Mute