Kenwood KDC-8080R Instruction Manual

Also see for KDC-8080R: Service manual

Kenwood KDC-8080R Instruction Manual Manual pdf 37 page image

You can automatically store all the receivable frequencies inthe band currently being listened to, and then recall them withthe touch of a button later. This function is especially usefulwhen you are travelling and do not know what stations areavailable. Up to 6 frequencies can be stored this way.Display and setting:Select the display “A-Memory” during the selecting function inthe menu system.Hold down either the 4 or ¢ button for two seconds ormore to start auto memory function.The numbers of the preset station buttons showed in order.When all the stations in a certain band are stored in the presetmemory, the auto memory entry stops. The tuner then playsthe last station received.• When the AF function is turned on whilst auto memory entrytakes place, only RDS stations (i.e., stations with RDScapability) are stored. RDS stations that have been preset forFM1 cannot also be preset in FM2 or FM3.• When the local seek function is turned whilst auto memoryentry takes place, stations with poor reception are not stored.• When the Traffic Information function is on , only the localtraffic information station frequency will be stored.Cancelling Auto Memory Entry During Its Operation:Press the MENU button whilst auto memory entry is takingplace to stop the process.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.The number of the recalled station is displayed.NOTE21Auto Memory Entry"Seek Mode Manual" : Manual tuning modeYou can choose from three tuning modes: auto seek, presetstation seek, and manual. The "AUTO 1" indicator lights upwhen auto seek tuning is selected, and the "AUTO 2" indicatorlights when preset station seek tuning is selected.Display and setting:“Seek Mode Auto1” : Auto seek tuning mode“Seek Mode Auto2” : Preset station seek tuning modeSelecting Tuning ModeWith the local seek function turned on, auto seek tuning skipsstations with relatively poor reception.Display and setting:"Local.S ON" : The local seek function is on."Local.S OFF" : The local seek function is off.Local Seek Function"NEWS OFF/ 00min/ 10min/ 20min/ 30min/ 40min/ 50min/60min/ 70min/ 80min/ 90min" (min= minutes): When you select the news interruption timeout interval, theNews function turns on and the NEWS indicator lights up.When a news bulletin is received, "NEWS" will be displayedand reception will begin at the preset volume.• If you choose the "20 min " setting, further news bulletins will notbe received for 20 minutes once the first news bulletin isreceived.• This function is only available if the desired station sends PTY-code for news bulletin or belongs to Network>-Network sending PTY-code for news bulletin.• If you turn on the news bulletin function in the MW/LW band,the band is switched automatically to the FM band.However, the MW/LW band is not returned to when you turnoff the function.NOTE— 37 —