Kenwood KDC-8080R Instruction Manual

Also see for KDC-8080R: Service manual

Kenwood KDC-8080R Instruction Manual Manual pdf 35 page image

Function of the KDC-8080RSwitch the preout between the rear and non-fading. When youswitch to non-fading, you can adjust the volume separately.The factory default is rear preout.Display and setting:"SWPRE Rear" : Rear preout"SWPRE N-Fad" : Non-fading preoutYou cannot use the high-pass filter with non-fading preout.NOTESwitching preoutYou can set the interval during which the open control panelcannot reverse to be hidden. During the period you have set,the faceplate can be removed from the faceplate bracket.Display and setting:"OFF WAIT" : 0sec / 3sec / 5sec / 10sec / 15sec / 20sec /25sec (sec=sec.)If you do not slide the faceplate lock switch during the periodwhich you have set, the unit’s power turns off after the controlpanel is automatically hidden.NOTETime setting for removing the faceplateThis function allows you to turn off the graphic part of thedisplay if there is too much information in the display.Display and setting:"BLACK MASK ON" : The display will be shown in horizontallydivided mode. When this function isenabled, the dual display mode is enteredand ••• (CD-IN) indicator is displayed.Clock alone is displayed in the lower part."BLACK MASK OFF" : The display will turn on by using thewhole part of the display.This function cannot be set in the full-screen display andhorizontal division display.NOTEBlack MaskYou can turn the movement of graphic display on and off.The initial setting is ON.Display and setting:"Graphic ON" : The graphic display works."Graphic OFF" : The graphic display does not work.Switching Graphic DisplayYou can dim the display.The dimmer function is not available for units if the dimmer cableis not connected.Display and setting:"Dimmer ON" : The dimmer setting is on."Dimmer OFF" : The dimmer setting is off.NOTEDimmer— 35 —