Kenwood KDC-8080R Instruction Manual

Also see for KDC-8080R: Service manual

Kenwood KDC-8080R Instruction Manual Manual pdf 34 page image

You can adjust the brightness level of the unit separately whenyour car's light switch has been turned on or off.Display and setting:"Bright 0" – "Bright 10"The initial setting value whilst your car's light switch is turned onis "5" , and whilst the light is turned off is "10" .NOTEBrightness level adjustmentYou can switch the colour of the button illumination betweengreen and red.Display and setting:"Color Green" : The colour of the illumination is green."Color Red" : The colour of the illumination is red.Selectable Illuminationtransmit the Mask Key’s signal.• If the Mask Key’s signal does not be received correctly, thedisplay will return to "TRANSMIT 1" . In this case, repeat theprocedure in step 5.Hold down the transmit button on the Mask key again until thefull transmit level indicator lights up in the display."APPROVED" will appear in the display, with the Mask keyfunction turning on.If you press the RESET button or remove the battery:The first time you turn the unit on again, "TRANSMIT 1" willappear in the display, indicating the setting mode has beenentered. Repeat steps 5 and 6 above, and transmit the signal.You can start operating the unit again when "APPROVED"appears in the display.6If you have transmitted the Mask Key's signal once to the unitin advance, you will have to transmit it once again if the unithas been removed from the battery. This function helpsprevent theft.When using the unit for the first time:In order to deactivate the demonstration mode, be sure topress the transmit button to transmit the Mask Key's signal.If this procedure is not carried out, the control panel of the unitwill re-open in two seconds even with your vehicle's ignitionturned off.Press the SRC button repeatedly to select the standby mode."ALL OFF" is displayed when the standby mode is selected.Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the FM button repeatedly until the "Mask key" appears inthe display.Press the AM button to search in the other direction.Hold down either the 4 or ¢ button for two seconds ormore."TRANSMIT 1" will appear in the display, indicating the settingmode has been entered.Hold down the transmit button on the Mask key until the fulltransmit level indicator lights up in the display."TRANSMIT 2" will be displayed.• Keep the Mask Key close to the signal sensor when youNOTETransmit buttonTransmission part54321Mask KeyMenu settings— 34 —English