|
English | 23⁄• This setting can be made when “Type Normal” is selectedfor the “Tuner Preset Type” of (page 38).Preset TuningRecalling the stations in the memory.1 Select the radio band2 Enter Menu List modePress the [MENU] button.3 Select a desired station in the memoryTurn the [VOL] knob and press it when thedesired item is displayed.Select “List & Memory” > Preset number.HD Radio™ SettingYou can select following HD Radio Setting items.1 Select the HD Radio source2 Enter Menu List modePress the [MENU] button.3 Turn the [VOL] knob and press it when thedesired item is displayed.Select “Settings”.4 Select the setting item to adjustTurn the [VOL] knob and press it when thedesired item is displayed.Display Overview“Settings”“Seek Mode” Selects the tuning mode of the radio.“Auto1”: Automatic search for a station.“Auto2”: Search in order of the stations in thePreset memory.“Manual”: Normal manual tuning control.“Auto Memory” Memorizes 18 stations (FM) or 6 stations (AM)with good reception automatically.Refer to (page 22)“Receive Mode” Sets the receive mode of the HD Radio receiver.“Auto”: Automatically tunes to analog broadcastwhen there is no digital broadcast.“Digital”: Digital broadcasts only.“Analog”: Analog broadcasts only.“TAG Memory” Displays the tag memory usage of HD Radioreceiver. Up to 50 tags can be registered tothis unit.“0”/“50”“Tagging” Turns ON / OFF the tag memory function ofHD Radio receiver.“OFF”/“ON”( : Factory setting)5 Make a settingPress the [4] or [¢] button.6 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.Function of remote controlDirect Access TuningTuning in a desired radio station by entering thefrequency.1 Select the radio band2 Enter Direct Access Tuning modePress the [DIRECT] button.“– – – –” is displayed.3 Select Tuning itemPress the [DIRECT] button.Pressing the [DIRECT] button each time switchesthe following tuning items as follows.Items DisplayFrequency “– – – –”Channel “HD –”Cancelling Direct Access Tuning —4 Enter the frequency or ChannelPress the number buttons.Example of frequency input:Desired frequency Press button92.1 MHz (FM) [9], [2], [1]810 kHz (AM) [8], [1], [0]5 Tune in to the entered frequency or ChannelPress the [4] or [¢] button.Cancelling Direct Access TuningPress the [DIRECT] button on the remotecontrol. PreviousNext |