Kenwood KDC-BT948HD Instruction Manual

Also see for KDC-BT948HD: Brochure & specs Quick start guide

Contents

56 | KDC-X995/ KDC-BT948HDSatellite Radio Tuner Control (Optional)Basic OperationSelecting Satellite Radio sourcePressing the [SRC] button repeatedly switchessource.Select the “SIRIUS”, or “XM” display.⁄• You need to register to the service provider to receivethe service by Satellite Radio. Consult the serviceprovider if “CALL … TO SUBSCRIBE” appears.• The radio may take a little time to start receiving afteryou select the Satellite Radio source.• If the signal reception fails, “Acquiring Signal”/ “No Signal”appears.Selecting the channelPress the [4] or [¢] button.Selecting the Preset Band1. Enter Menu List modePress the [MENU] button.2. Turn the [VOL] knob and press it when thedesired item is displayed.Select “SR1”, “SR2”, “SR3” or “SR4”. (SIRIUS)Select “XM1”, “XM2”, “XM3” or “XM4”. (XM)Satellite Radio SettingYou can select following Satellite Radio Settingitems.1 Select Satellite Radio source2 Enter Menu List modePress the [MENU] button.3 Turn the [VOL] knob and press it when thedesired item is displayed.Select “Settings”.4 Select the setting item to adjustTurn the [VOL] knob and press it when thedesired item is displayed.Display Selectable setting/item“Settings”“Seek Mode” Selects the tuning mode of the radio.“Channel”: Normal manual seeking control.“Preset”: Search in order of the channels in thePreset memory“ESN” Displays the Electronic Serial Number of satelliteradio.“ESN=”( : Factory setting)5 Make a settingPress the [4] or [¢] button.6 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.Category and Channel SearchSelecting the channel and category you want toreceive.1 Select Satellite Radio source2 Enter Menu List modePress the [MENU] button.3 Enter Category and Channel Search modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Channel Search”.4 Select the CategoryTurn the [VOL] knob to select Category, andthen press the [VOL] knob.5 Select the ChannelTurn the [VOL] knob to select Channel, andthen press the [VOL] knob.SRC4MENU VOL¢