Kenwood KDC-BT948HD Instruction Manual

Also see for KDC-BT948HD: Brochure & specs Quick start guide

Contents

38 | KDC-X995/ KDC-BT948HDClock and Other FunctionsInitial SettingsYou can select following Initial Setting items.1 Select the StandbyPressing the [SRC] button repeatedly switchessource.Select the “STANDBY” display.2 Enter Menu List modePress the [MENU] button.3 Enter Initial Setting modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Initial Settings”.4 Select the setting item to adjustTurn the [VOL] knob.Display Overview“Initial Settings”“Tuner Preset Type” You can select a preset type.“Type Normal”: Memorizes one station for eachpreset button in each band (FM/ AM/ SR1 –SR4/ XM1 – XM4).“Type Mixed”: Memorizes one station for eachpreset button regardless of the selected band(FM/ AM) and another Satellite Radio Tuner.“SRC Select” Sets the source selection method.“Settings 1”/ “2”“Beep” Setting the operation check sound (beep sound)ON/OFF.“OFF”/ “ON”“Menu Language” You can select the display language for theMenu list item.“English”/ “Français”/ “Español”“Pandora Source” When this is set to ON, Pandora source can beselected.“ON”: Allows you to select the Pandora sourceby connecting a Pandora-compliant iPhone.“OFF”: Disable Pandora source selection.“Built in AUX” When this is set to ON, AUX source can beselected.“ON”: Allows AUX source to be selected. Usethis setting when the built-in AUX terminalis connected to the external equipment allthe time.“OFF”: Disable AUX source selection. Use thissetting when the built-in AUX terminal isnot used.“Forced CD-DA” Sets the method for reading CD.“Settings 1”: Automatically distinguishesbetween audio file disc and music CD whenplaying disc.“Settings 2”: Forces playing as music CD.“Built in AMP” Selecting “OFF” turns off the built-in amplifier.Turning off the built-in amplifier improves thequality of the sound from Preout.“OFF”/ “ON”“DSI” DSI (Disabled System Indicator) of the unit blinkswhen the faceplate is removed.“OFF”/ “ON”“F/W Update” Updates the firmware. The update informationwill be posted on the following URL asnecessary.www.kenwood.com/cs/ce/( : Factory setting)5 Make a setting• When the “ PUSH ” icon is displayed (at theright edge of the display)Turn the [VOL] knob to select a setting value,and then press the [VOL] knob.• When the “ PUSH ” icon is not displayedPress the [4] or [¢] button to select asetting value.6 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.Demonstration mode SettingTurning the demonstration mode ON/OFF.1 Enter Menu List modePress the [MENU] button.2 Enter Demonstration mode settingTurn the [VOL] knob and press it when thedesired item is displayed.Select “DEMO Mode”.3 Set the Demonstration modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “ON” or “OFF”.4 Exit Menu List modePress the [MENU] button.