English | 9Play ModeYou can select a Play Mode, such as Random playand Repeat play.1 Select iPod source2 Enter Play Mode MenuPress the [VOL] knob for at least 1 second.✍ You can also select from “Play Mode” in MenuList mode.3 Select the Play ModeTurn the [VOL] knob.Display Overview“iPod by Hand” When set to “ON”, allows you to operate iPodwith the control on the iPod.“ON”/ “OFF”“Folder Random” When set to “ON”, plays the music in the folderrandomly.“ON”/ “OFF”“All Random” When set to “ON”, plays all songs in iPodrandomly.“ON”/ “OFF”“File Repeat” When set to “ON”, plays the music repeatedly.“ON”/ “OFF”4 Make a settingPress the [4] or [¢] button.5 Exit Play Mode MenuPress the [MENU] button.Remarks• All Random• The time required to turn on the all random functionmay become longer depending on the number of songsin iPod.• Turning on the all random function changes the iPodbrowse item to “Songs”. This browse item will not bechanged even if the all random function is turned off.• If the browse item is changed to search for music whilethe all random function is on, the all random function isturned off and the songs in the browse item are playedat random.• iPod by Hand (iPod Control by Hand Mode)Allows you to operate iPod with the control on the iPod.⁄• In the iPod Control by Hand Mode, iPod cannot beoperated using this unit.• This mode is not compatible with music informationdisplay. The display will show “iPod by Hand Mode”.• iPod can be operated when it conforms to the iPodcontrol function.iPod SettingYou can select following iPod Setting items.1 Select iPod source2 Enter Menu List modePress the [MENU] button.3 Turn the [VOL] knob and press it when thedesired item is displayed.Select “Settings”.4 Select the setting itemTurn the [VOL] knob and press it when thedesired item is displayed.Display Overview“Settings”“Skip Search” Sets the ratio of skip performed with Search> (page 12).“0.5%”/ “1%”/ “5%”/ “10%”“Delete MyPlaylist”Deletes the registered My Playlist.Refer to (page 12) for the operation.“One”/ “All” ➜ “Yes”/ “No”( : Factory setting)5 Make a setting• When the “ PUSH ” icon is displayed (at theright edge of the display)Turn the [VOL] knob to select a setting value,and then press the [VOL] knob.• When the “ PUSH ” icon is not displayedPress the [4] or [¢] button to select asetting value.6 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.⁄• The setting of “Skip Search” in (page 9)and that in Setting> (page 17) are always the same.Changing the setting of one reflects the other.