Kenwood KDC-BT948HD Instruction Manual

Also see for KDC-BT948HD: Brochure & specs Quick start guide

Contents

34 | KDC-X995/ KDC-BT948HDDisplay SettingsCustomization of Clock Display ModeYou can customize the display of the Clock Displaymode.1 Select the sourcePressing the [SRC] button repeatedly switchessource.2 Enter Menu List modePress the [MENU] button.3 Enter Display Setting mode and Select theClock DisplayTurn the [VOL] knob and press it when thedesired item is displayed.Select “Settings” > “DISP & ILLUMI” > “DisplaySelect” > “Type Select” > Clock Display mode.4 Select the setting item to adjustTurn the [VOL] knob and press it when thedesired item is displayed.Display Setting“Display Select”“Type Select” Selects the Clock Display mode.“GraphicSelect”Switches between single and dual clock.5 Make a settingTurn the [VOL] knob to select a setting value,and then press the [VOL] knob.6 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.Illumination Color SelectionSelecting the Illumination Color of the panel.1 Enter Menu List modePress the [MENU] button.2 Enter Illumination color selection modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Settings” > “DISP & ILLUMI” > “ColorSelect”.3 Select the place where you want to set theIllumination ColorTurn the [VOL] knob and press it when thedesired item is displayed.Display Place“All” Display and key“Display” Display“Key” Key4 Select the Illumination ColorTurn the [VOL] knob and press it when thedesired item is displayed.Select the color from “Variable Scan”/ “Color1” —“Color 24”/ “User”.Creating “User” colorYou can create your original color during theselection from “Color1” — “Color24.”The color you created can be called when youselect “User”.1. Press the [VOL] knob for at least 1 second.Enter the detail color adjustment mode.2. Set the color.Operation type OperationTo select the color to adjust.(red, green, or blue)Press the [4] or [¢] button.To adjust color.(Range: 0 – 9)Turn the [VOL] knob.3. Press the [VOL] knob.Exit the detail color adjustment mode.5 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.