English|15Equalizer Control1Select the source to adjustPress the [SRC] button.2Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "EQ" isdisplayed above the [3] button.Refer to (page 9).3Enter Equalizer Control modePress the [3] ("EQ") button.• When "2 ZONE" of you cannot select "EQ".4Select the Equalizer Control item to adjustPress a [1] — [3]/[5] button.Multi-function key operationEqualizer Control Item[1] "SYS.Q"System Q Setting[2] "F"Equalizer Front Setting[3] "R"Equalizer Rear Setting[5] "Preset"[1] "RCL"[2] "MEM"Recall modeMemory mode• "Preset": You can store an adjusted equalizer controlvalue by selecting "MEM". Refer to mode> (page 17). Also, you can recall it byselecting "RCL". Refer to mode> (page 17).5Adjust the Equalizer control itemSystem Q Setting (Sound Type)Push the Control knob towards [4] or[¢].Each time you push the knob, the settingalternates between the settings shown in thetable below.Sound settingDisplayUser memory"USER"Natural"NATURAL"Rock"ROCK"Pops"POPS"Easy"EASY"Top 40"TOP 40"Jazz"JAZZ"• User memory:The values set on the • Change each setting value with the Management system> (page 14).First, select the speaker type with the Speaker setting.Equalizer Front Setting/Equalizer Rear Setting1 Select a frequency band you wish to adjust.Press the [2] ("F") or [3] ("R") button.Each time you press the button, the bandalternates between "Band 1" and "Band 4".2 Select the items to adjust for Equalizer.Push the Control knob towards [FM] or [AM].Each time you push the knob, the item to beadjusted alternates between the items shownin the table below.3 Adjust the Equalizer.Push the Control knob towards [4] or[¢].Each time you push the knob, the settingalternates between the settings shown in thetable below.Equarizer adjustment itemRangeEqualizer Front Frequency/Equalizer Rear FrequencyRefer to the followings.Equalizer Front Level/Equalizer Rear Level–9 — +9Equalizer Front Quality/Equalizer Rear Quality0.25/ 0.50/ 1.00/ 2.00• The frequency which can be selected by eachFrequency band is shown below.BandFrequencyBand160/ 80/ 100/ 120/ 160/ 200 HzBand2250/ 315/ 400/ 500/ 630/ 800/ 1k HzBand31.25/ 1.6/ 2/ 2.5/ 3.15/ 4 kHzBand45/ 6.3/ 8/ 10/ 12.5/ 16 kHz• To get the best sound, first set the Cabin Settingand Speaker Select Front/Rear parameters using the (page 14).6Exit Equalizer Control modePress the [6] ("RTN") button.
