English|5Notes• If you experience problems during installation,consult your Kenwood dealer.• When you purchase optional accessories, checkwith your Kenwood dealer to make sure that theywork with your model and in your area.• If the unit fails to operate properly, press the Resetbutton. The unit returns to factory settings whenthe Reset button is pressed.• Press the reset button if the disc auto changer failsto operate correctly. Normal operation should berestored.• Characters that conform to ISO 8859-1 can bedisplayed.• Characters that conform to ISO 8859-5 or ISO8859-1 can be displayed. Refer to Russian Characters> (page 44). (Russian sales areaof KDC-W8534)• The RDS feature won’t work where the service isnot supported by any broadcasting station.• There are places in this manual where litindicators are described; however, the only timean indicator will light is in the following settings.When Indicator is selected as mentioned in Display Switching> (page 22).• The illustrations of the display and the panelappearing in this manual are examples used toexplain more clearly how the controls are used.Therefore, what appears on the display in theillustrations may differ from what appears onthe display on the actual equipment, and someof the illustrations on the display may representsomething impossible in actual operation.Cleaning the UnitIf the faceplate of this unit is stained, wipe it with adry soft cloth such as a silicon cloth.If the faceplate is stained badly, wipe the stain offwith a cloth moistened with neutral cleaner, thenwipe it again with a clean soft dry cloth.• Applying spray cleaner directly to the unit may affect itsmechanical parts. Wiping the faceplate with a hard clothor using a volatile liquid such as thinner or alcohol mayscratch the surface or erases characters.Cleaning the Faceplate TerminalsIf the terminals on the unit or faceplate get dirty,wipe them with a dry, soft cloth.Before using this unit for the first timeThis unit is initially set on the Demonstration mode.When using this unit for the first time, cancel the (page 46).About ODD (Offset Dual Differential) D/ASystemThe high quality sound play is to be done by ODDD/A System. Dual D/A converters are built-in theODD D/A System, and the digital processing isisolated and controlled separately for front channelso the channel separation is improved sharply.Also, the ODD D/A System produces the data bywhich the sound data is offset on the minus sideand converts the two signals (original and offsetdata) to the analog signal, which has less noise anddistortion, by the synthetic process.However, ODD D/A System will be disabled if thefollowing settings are selected.- When "2 ZONE" of "ON".- When (page 16) is "Bypass".About DAB Tuner controlRefer toAgroup on the Instruction manual of DABTuner KTC-9090DAB (optional accessory) for thecontrol method of DAB Tuner function.However, the following control methods of thefunction for this unit may be different from theInstruction manual; therefore, refer to the followingsupplemental instruction.1. Select the preset band for Auto EnsembleMemory Entry.2. Press the [AME] button for at least 2 seconds.Open Auto Ensemble Memory Entry.After storing in the memory finishes, thenumber of the pre-set buttons and theensemble label are displayed.and inAt the operation to press [DISP] button, use [TI]button instead.Reset button
