Kenwood KDC-W8534 Instruction Manual

Also see for KDC-W8534: Service manual

Kenwood KDC-W8534 Instruction Manual Manual pdf 40 page image

40 | EnglishDisplay Illumination ControlThis function turns off the display when youperform no operation for 5 seconds. This functionis effective when you are driving at night.Display Setting"Display : ON" Keeps the display on."Display : OFF" Turns off the display when you perform nooperation for 5 seconds.• Set the Display Illumination Control when the (page 46) is set toOFF.• When the display is off, pressing any key will turn onthe display.• When the display is off, you cannot perform anyoperation except for the following:• Volume• Attenuator• Selecting the source• Ejecting the disc• Faceplate Angle Adjustment• Turning off the power• During function control, such as the Menu System, thedisplay stays on.In Standby modeDimmerDimming this unit’s display automatically whenthe vehicle light switch is turned ON.Display Setting"Dimmer : ON" The display dims."Dimmer : OFF" The display doesn’t dim.In Standby modeBuilt-in Amp SettingControlling the built-in amplifier.Turning OFF this control enhances the preoutquality.Display Setting"AMP : ON" The built-in amplifier activates."AMP : OFF" The built-in amplifier deactivates.Other than Standby mode/When the Dual Zone System is ONDual Zone System SettingSetting the Front channel and Rear channelsound in the Dual Zone System.Display Setting"Zone 2 : Rear" Sub source (Auxiliary input source) is to be rearchannel."Zone 2 : Front" Sub source (Auxiliary input source) is to be frontchannel.Menu systemIn Standby modeSelectable IlluminationSelecting the button illumination color as greenor red.Display Setting"Button : Red" The illumination color is red."Button : Green" The illumination color is green.