Kenwood KDC-W8534 Instruction Manual

Also see for KDC-W8534: Service manual

Kenwood KDC-W8534 Instruction Manual Manual pdf 46 page image

46 | EnglishMenu system In Standby modeDemonstration mode SettingSets the demonstration mode.1 Select the Demonstration modePush the Control knob towards [FM] or [AM].Select the "DEMO Mode" display.2 Set the Demonstration modePress the Control knob for at least 2 seconds.Each time you press the knob at least 2 seconds,the Demonstration mode alternates between thesettings shown in the table below.Display Setting"DEMO Mode : ON" The Demonstration mode function is ON."DEMO Mode : OFF" Exit Demonstration mode (Normal mode).In CD modeACDrive firmware version displayDisplaying the firmware version with the ACDrivefunction.1 Select the firmware version display modePush the Control knob towards [FM] or [AM].Select the "ACD F/W Version" display.2 Display the ACDrive firmware versionPush the Control knob towards [4] or[¢].In CD modeUnique ID displayDisplaying the serial number for each product.1 Select the unique ID display modePush the Control knob towards [FM] or [AM].Select the "ACD Unique ID" display.2 Display the unique IDPush the Control knob towards [4] or[¢].Function of ACDrive discVoice IndexSetting the announcement during the play ofACDrive disc.Display Setting"Voice Index : ON" Guide is announced."Voice Index : OFF" Not be announced.• KDC-W8534 (Russian sales area)Default setting is "Voice Index : OFF".