Kenwood KDC-W8534 Instruction Manual

Also see for KDC-W8534: Service manual

Kenwood KDC-W8534 Instruction Manual Manual pdf 19 page image

English | 19Display Type SelectionChanging the display mode.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "DISP" isdisplayed above the [6] button.Refer to (page 9).2 Enter display control modePress the [6] ("DISP") button.3 Select the display modePress the [1] ("MODE") button.4 Select the display TypePush the Control knob towards [4] or[¢].Each time you push the knob, the display modealternates between the display modes shown inthe table below.Display Mode Display"Display Type A" 1"Display Type B" 1 2"Display Type C" 433 53 6"Display Type D" 4 768 8 8 8 8 81 Graphic display part2 Text display part3 Text icon display part4 Upper text display part5 Middle text display part6 Lower text display part7 Source icon display part8 Function item display5 Exit display control modePress the [6] ("RTN") button.• Under the display type other than "Display Type D",the function item is not displayed. When you selectthe display type other than "Display Type D", press [1]to [6] buttons or [NEXT] button. The function item willbe displayed approximately 5 seconds.• The indicator is displayed when the display type is setto "Display Type C" or "Display Type D".• Change the information by the Display Type. Refer tothe page on the following table for the methods toalternate by the Display Type.Display Type A B C DGraphic 1 20 20 — —Text 2 — 21 — —Upper 4 — — 22 22Middle 5 — — 23 —Lower 6 — — 23 23