Kenwood KDC-X7000DAB Instruction Manual

Also see for KDC-X7000DAB: Instruction manual

Contents

ENGLISH 5F/W UPDATEUPDATE SYSTEM/ UPDATE DAB1/ UPDATE DAB2F/W UP xx.xx/F/W UP xxxxx/F/W UP VxxxYES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels.CLOCKCLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ;OFF: Cancels.ENGLISH Select the display language for [FUNCTION] menu and music information ifapplicable.By default, [ENGLISH] is selected.РУССКИЙESPANOLChange the crossover type1 Press repeatedly to enter STANDBY.2 Press and hold number buttons 4 and 5 to enter crossover select.The current crossover type appears.3 Turn the volume knob to select “2WAY” or “3WAY”, then press the knob.4 Turn the volume knob to select “YES” or “NO”, then press the knob.The selected crossover type appears.• To cancel, press and hold .• To adjust the selected crossover settings, ( 19).CautionSelect a crossover type according to how the speakers are connected. ( 29)If you select a wrong type:• The speakers may damage.• The output sound level may be extremely high or low.GETTING STARTED DIGITAL RADIOAbout DAB (Digital Audio Broadcasting)DAB is one of the digital radio broadcasting systems availabletoday. It can deliver digital quality sound without any annoyinginterference or signal distortion. Furthermore, it can carry text,pictures and data.In contrast to FM broadcast, where each program is transmittedon its own frequency, DAB combines several programs (called“services”) to form one “ensemble.”The “primary component” (main radio station) is sometimesaccompanied by a “secondary component” which can containextra programs or other information.Preparation:1 Connect the supplied DAB antenna to the DAB antenna jack.( 29)2 Press repeatedly to select DIGITAL AUDIO.3 Press and hold (LIST UPDATE) to start the Service Listupdate.“LIST UPDATE” appears and update starts. “UPDATED” appearswhen update completes.Updates take up to 3 minutes. No interruption (such as trafficinformation) is possible during updates.• To cancel the Service List update:Press and hold (LIST UPDATE) again.