10 | KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013ULDisplay SettingsDisplay Type SelectionShown below are examples of display types.Display Display Type“TYPE [A]” Displays 4 to 5 lines of text.“TYPE [B]” Displays a line of text and video.“TYPE [C]” Displays a line of text and the spectrum analyzer.“TYPE [D]” Displays the clock.1 Enter Display type selection modeSelect “SETUP” > “Display Select” > “TypeSelect”.For how to select Function Control item, refer to (page 6).2 Select the Display typeTurn the Control knob.3 Exit Display type selection modePress the [FNC] button.⁄• For how to switch the text display information, refer to (Page 10).• When “TYPE [A]” is selected, the status (ON/OFF indicatorof each function) can be displayed on the first line, andthe icon of the currently selected source and the textinformation title can be displayed on the left side by thefollowing (page 6) operation.Status display: Select “SETUP” > “Display Select” > “Status”Side display: Select “SETUP” > “Display Select” >“Side Select”• When “TYPE [C]” is selected, the spectrum analyzer canbe switched by the following (page6) operation.: Select “SETUP” > “Display Select” > “Graphic Select”Text Display SelectionChanges displayed information on each sourcefollowing;In Tuner sourceInformation DisplayFrequency “Frequency”Spectrum analyzer & Clock (“TYPE [A]/[B]”)or Clock (“TYPE [C]”)“Speana/Clock”or “Clock”Date “Date”Blank “Blank”In CD & External disc sourceInformation DisplayDisc title “Disc title”Track title “Track title”Play time “P-Time”Spectrum analyzer & Clock (“TYPE [A]/[B]”)or Clock (“TYPE [C]”)“Speana/Clock”or “Clock”Date “Date”Blank “Blank”In Audio file/ iPod sourceInformation DisplayTitle & Artist name “Title/Artist”Album & Artist name “Album/Artist”Folder name “Folder name”File name “File name”Play time “P-Time”Play time bar (iPod only)* “Time Bar”Spectrum analyzer & Clock (“TYPE [A]/[B]”)or Clock (“TYPE [C]”)“Speana/Clock”or “Clock”Date “Date”Blank “Blank”* Can be displayed only on the bottom line of “TYPE [A]”text.In Standby/ Auxiliary input sourceInformation DisplaySource name “Source Name”Clock “Clock”Date “Date”Blank “Blank”1 Enter Text display selection modeSelect “SETUP” > “Display Select” >“Text Select”.For how to select Function Control item, refer to (page 6).2 Select the text display partPush the Control knob towards up or down.The selected text display part blinks.