Kenwood KDC-X7013U Instruction Manual

English | 113 Select the textTurn the Control knob.4 Exit Text display selection modePress the [FNC] button.⁄• If the selected display item does not have anyinformation, alternative information is displayed.• When LX-AMP is connected, the item setup by theDisplay mode of LX-AMP is displayed.• Some items cannot be selected depending on thedisplay type and row.• When selecting “Folder name” while playing withiPod, names will be displayed depending on currentlyselected browsing items.• If the iPod Control by Hand Mode is set to on whileplaying the iPod, “iPod by Hand Mode” is displayed.• If all characters cannot be displayed while playing withiPod, the file number in the list is displayed.Information DisplayMusic title “TITLE***”Folder name “FLD***”File name “FILE***”Auxiliary Input Display SettingSelects the display when changing to Auxiliaryinput source.1 Select the AUX sourcePress the [SRC] button.2 Enter Auxiliary input display setting modeSelect “MENU” > “Name Set”.For how to select Function Control item, refer to (page 6).3 Enter Auxiliary input display setting modePress the Control knob for at least 1 second.The presently selected Auxiliary input display isdisplayed.4 Select the Auxiliary input displayTurn the Control knob.“AUX”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV”5 Exit Auxiliary input display setting modePress the [FNC] button.⁄• When operation stops for 10 seconds, the name at thattime is registered, and the Auxiliary input display settingmode closes.• The Auxiliary input display can be set only when thebuilt-in auxiliary input or the auxiliary input of optionalKCA-S220A is used. On the KCA-S220A, “AUX EXT” isdisplayed by default.• AUX source is initially set to “OFF”. Before display setting,set “Built in AUX” described in (page6) to “ON”.: Select “MENU” > “Built in AUX”Illumination Color SelectionSelecting the Illumination Color of the panel.1 Enter Illumination color selection modeSelect “SETUP” > “Color Select”.For how to select Function Control item, refer to (page 6).2 Select the place where you want to set theIllumination ColorPlace DisplayAll “All”Display “Display”Right “Right”Left “Left”Turn the Control knob and push the centerwhen the desired item is displayed.3 Select the Illumination ColorTurn the Control knob and push the centerwhen the desired item is displayed.Select the color from “Variable Scan”/ “Color1” —“Color 10”/ “User”.Creating “User” colorYou can create your original color during theselection from “Color1” — “Color10.”The color you created can be called when youselect “User”.1. Press the Control knob for at least 1 second.Enter the detail color adjustment mode.2. Set the color.Operation type OperationTo select the color to adjust.(red, green, or blue)Push the Control knob towards rightor left.To adjust color.(Range: 0 – 9)Turn the Control knob or push ittowards up or down.3. Press the Control knob.Exit the detail color adjustment mode.4 Exit Illumination color selection modePress the [FNC] button.