28 | KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013ULSound SetupPreset position selectionAccording to the listening position, select theposition from the following settings so that thenormal position of the sound environment canbe compensated in accordance with the selectedposition;Compensation seat RangeNot compensating. “ALL”Front-Left seat “Front-Left”Front-Right seat “Front-Right”Front seat “Front”1 Enter Preset position setting modeSelect “SOUND” > “Control” > “Position” >“Preset Position”.For how to select Function Control item, refer to (page 6).2 Select the seat you want to compensateTurn the Control knob.3 Exit Preset position setting modePress the [FNC] button.Manual position settingMaking fine adjustment of the value specified atPreset position selection per speaker.1 Enter Manual position setting modeSelect “SOUND” > “Control” > “Position” >“Manual Position”.For how to select Function Control item, refer to (page 6).2 Select the speaker you want to setItem Setting overview“FRONT” / “L” Front Left speaker“FRONT” / “R” Front Right speaker“REAR” / “L” Rear Left speaker“REAR / “R” Rear Right speaker“SUBWOOFER” / “L” Subwoofer Left“SUBWOOFER” / “R” Subwoofer Right“INITIAL” Initialize the setting values.Push the Control knob towards up or down.3 Set the valueTurn the Control knob.Adjust between 0 and 170 cm.Press the Control knob for at least 1 second if youwant to execute the “INITIAL”.4 Exit Manual position setting modePress the [FNC] button.